Connecting This Unit To Your Computer - Sony MSAC-US40 Operating Instructions Manual

Connecting this unit to your computer

PNote
Be sure to install the supplied software before you connect this unit to your
computer. Restart your computer following installation.
Connect the USB port on this unit to a USB port on your computer using
the special USB cable supplied.
On the special USB cable
A connector: This is plugged into the USB port on the computer. Any
ports can be used if the computer is provided with multiple
USB ports.
Mini-B connector: This is plugged into the USB port on this unit.
1
Firmly insert the Mini-B connector of the USB cable into the
USB port on this unit as far as it will go.
2
Plug the A connector of the USB cable into a USB port on your
computer.
• The "Found New Hardware Wizard" starts up and installation of
the driver begins. Depending on the OS, the driver installation may
take place automatically.
• The location of the USB port on the computer differs with the
computer used.
• When using a computer with multiple USB ports, do not connect
other devices, with the exception of a standard mouse and keyboard,
to USB ports at the same time as this unit. When using a desktop
computer, use a USB port on the main unit of the computer. For
details, see "Recommended ways for connecting this unit" on page
20.
USB port
A connector
USB port
Mini-B
connector
Access lamp
* Serial number
(8-digit number on the
backside of this unit)
19-GB