Page 1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Sagrad DOC # 906-0001...
Page 2
FCC or IC. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Sagrad DOC # 906-0001...
Page 3
Never spill liquid of any kind on the product. 14. Servicing—Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Sagrad DOC # 906-0001...
Page 4
17. Mounting—The product should be mounted to a rack, wall or shelf only as recommended by the manufacturer. 18. Heat—The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Sagrad DOC # 906-0001...
Page 5
EQUIPMENT CABINET INSTALLATION The Sagrad equipment box contains the transmitters, antenna, power supply, rack mounting hardware and wall mounting hardware. Find a space that the cabinet will fit in/on near the A/V equipment that will be connected to the transmitters.
Page 6
Special care some be take to insure the coax cable will not be damaged over time by rubbing on sharp surfaces. EQUIPMENT FRONT AND BACK Sagrad DOC # 906-0001...
Packing List 1. One SG901-1023 8 Channel Transmitter 2. One 9V DC Power Supply 3. One Antenna 4. Two Rack Mounted Brackets 5. One User / Installation manual User Section This product needs no adjustments. Follow the installation instructions and you are ready to operate the unit.
LABOR: For the period of one (1) year from the date of purchase, if this product is determined to be defective, Sagrad will repair or replace the Product, as its option, at no charge, or pay labor charges to any Sagrad authorized service facility.