Gyropad GS32 User Manual

GS32 User's Guide
Please read it before you ride on it!!!
Gyropad Electric Skateboard was designed for those who are older than 13 with previous skateboard riding experience. We
highly recommend all riders wear protective gears such as helmets, elbow and knee pads, goggles and gloves etc. at all times
while you are riding the skateboard. Children should ride the skateboard under adult supervision at all times. Do not use on ice
or icy surfaces, near motorized vehicles of any kind.
Before you ride, please read and understand the electric skateboard features and safety instructions. Please check the mode
setting before you ride on it. The default setting is 3 speed modes. Press mode button 3 times, you will see 3 speed modes. If
you see AUTO RIDE mode and 2 other speed modes. Please disable the AUTO RIDE mode. DO NOT RIDE IT ON AUTO RIDE
MODE UNLESS YOU KNOW HOW TO DECELERATE AND STOP! Do not press the mode button to stop the skateboard when you
are riding the skateboard, which will lead to a sudden STOP and make you fall off. Always pull the wheel button back to
decelerate and stop the skateboard when you were on AUTO RIDE MODE.
How to reset the mode to default riding modes:
Hold the directional button and the mode button at the same time when the power is off until you see the 4 solid green light
bar are ON. Turn off the power and turn on again. You should be on default speed setting. Double check it by flipping the
skateboard, press the mode button 3 times, you shall see slow speed, medium speed and fast speed. If for any reason, you see
AUTO RIDE mode, please reset it to default 3 manual speeds.