Summary of Contents for SAFEQUIP IONIC
- Page 1 AQUASAFE HOSE INFLATION SYSTEM USER MANUAL - VERSION 1 The Hose Inflation System is a registered design of Safequip Ltd Design Registration Number: 6007388 © Safequip 2017 - All Rights Reserved PAGE 1 © Safequip 2017 - All Rights Reserved...
- Page 2 & 300 bar compressed air cylinders. 1 x Yellow Hose Tail End with Male Coupling 1 x Red Hose Tail End with Female Coupling fitted with 1 x Inflation Valve and 1 x Pressure Relief Valve. PAGE 2 © Safequip 2017 - All Rights Reserved...
- Page 3 See fig 6&7 When the hose is fully deflated, remove both tail ends from the fire hose and replace the protective cap on the inflation valve to mitigate any damage to the valve. PAGE 3 © Safequip 2017 - All Rights Reserved...
- Page 4 Check that the ‘O’ ring for the DIN cylinder connection is still in position: See fig 11 Important Safequip cannot be held responsible for injury due to mishandling of compressed air cylinders. Please ensure you read this manual to Figure 10 ensure safe operation of the system.
- Page 5 If you have any comments on how to improve this hose inflation system, please product brand let us know by email at sales@safequip.co.uk The content of this manual including images are the sole property of Safequip Ltd and are protected under copyright. PAGE 5 © Safequip 2017 - All Rights Reserved...
Need help?
Do you have a question about the IONIC and is the answer not in the manual?
Questions and answers