Zvm-133 And Zvm-136 Installation - Zenith ZVM-131 Service Manual

ZVM-133 and ZVM-136 Installation
1. Connect the cables as shown in Figure 3.
2. Select green or color:
If the monitor is to be used for text display,
select green by pushing the CONTRAST-
GREENIWHITE control.
If the monitor is to be used for graphics display
or combined text and graphics display, select
color by pulling out on theCONTRAST-GREENI
WHITE control.
Installation
3. Turn on the computer and monitor power switches.
The power indicator on the front of the monitor
should light.
4. After the monitor has warmed up, adjust the
BRIGHTNESS control for the desired display bright-
ness.
5. If the monitor is to be used with a personal com-
puter, display the PC color bar from the ROM and
adjust the CONTRAST-GREENIWHITE control so
that the bottom eight color bars have the desired
color intensity.
Page 13