Dacor Epicure PN AFG36 Installation Instructions

Refrigerator upper trim kit for ef36bnnf

Hide thumbs

REFRIGERATOR MODEL: EF36BNNF

Tools Required

•

5/16" hex driver or socket (not supplied)

•

Phillips head screwdriver (not supplied)

Parts Included

Installation Preparation

STEP 1

Make sure the top surface of the refrigerator is

clean and dry.

STEP 2

Using a Phillips head screwdriver, remove

both hinge covers. NOTE: Since the new trim

piece will cover the hinges, the hinge covers

and their screws may be discarded.

Hinge cover

(remove)

Step 2: Hinge Cover Removal

Epicure

Refrigerator Upper Trim Kit

Epicure Style Trim Assembly (1)

(see back cover for dimensions and layout)

Hinge

NOTE: Hinge style may vary

PN AFG36

CAUTION: To avoid damage to the refrigerator or

components, do not use power tools. Use hand

tools only.

INSTALLATION

INSTRUCTIONS

Hinge Cover

Locations

Part No. 106327 Rev. E

Table of Contents

Need help?

Do you have a question about the Epicure PN AFG36 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dacor Epicure PN AFG36

Page 1 REFRIGERATOR MODEL: EF36BNNF Epicure Refrigerator Upper Trim Kit INSTALLATION ® PN AFG36 INSTRUCTIONS Tools Required CAUTION: To avoid damage to the refrigerator or components, do not use power tools. Use hand • 5/16” hex driver or socket (not supplied) tools only. •...
Page 2 Refrigerator Trim Kit Installation Instructions STEP 3 Using a 5/16” socket, remove and retain the inner rear screw from both hinges. Remove back Remove back inner screw inner screw Left side of Right side of refrigerator refrigerator Hinge Locations Trim Installation STEP 4 Peel the protective cover off the foam tape strips on the bottom side of the trim base plate.
Page 3 Refrigerator Trim Kit Installation Instructions IMPORTANT: Once it makes contact with the top of the refrigerator, the trim cannot be removed without damaging the foam tape. Read step 5 carefully before installing the trim assembly. STEP 5 Install the trim assembly on top of the refrigerator. Line up the inner mounting holes in the trim piece with the rear inner hinge screw holes on the refrigerator as shown.
Page 4 Trim assembly Description Dimension 71 7/8” (182.6 cm)* (F) Distance to floor 72 1/2” (184.2 cm)** (G) Trim height from 2 7/8” (7.3 cm) top of refrigerator chassis (H) Depth 3 3/16” (8.1 cm) Refrigerator Door * With leveling legs in down position chassis ** With leveling legs in fully extended position Trim Assembly Dimensions, Installed - Side View Dacor ● 600 Anton Blvd. Suite 1000 Costa Mesa, CA 92626 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.Dacor.com...