Ip Address Configuration - D-Link AirPremier DWL-AG660 Quick Installation Manual

IP Address Configuration
To connect to a network, make sure
the proper network settings are
configured for DWL-AG660.
For Microsoft Windows XP:
Go to Start > Right-click on
My Network Places
select Properties > Right-click and select
Properties on the Network Connection
associated with the DWL-AG660.
Click Internet Protocol (TCP/IP)
Click Properties
Dynamic IP address setup
Used when a DHCP server
the local network. (i.e. Router)
Select Obtain an IP address
automatically
router or access point has DHCP
server enabled)
Select Obtain DNS server
address automatically
Click OK
Static IP address setup
Used when a DHCP server
on the local network.
Select Use the following IP address
IP address:
Subnet mask:
Input a static IP address in the same range as the
wireless router or access point.
Click OK
>
is available on
(if the wireless
is not available
192.168.0.52
255.255.255.0
10