Stainless Steel Surfaces; Control Knobs - LG LSCG366 Series Owner's Manual

STAINLESS STEEL SURFACES

To avoid scratching the surface, do not use steel
wool on stainless steel. Clean with warm, soapy
water or a stainless steel cleaner or polish. Follow
the directions on the cleaner. Always wipe in the
direction of the grain.

CONTROL KNOBS

It's a good idea to wipe the control panel with a damp
cloth after each use of the cooktop.
Use mild soap and water or a 50/50 solution of
vinegar and water. Use clean water for rinsing.
Do not use abrasive cleansers, strong liquid
cleaners, plastic scouring pads or oven cleaners on
the control knobs - they can cause damage to the
finish of the knobs.
Do not try to bend knobs by pulling them up or down
or by hanging a towel or other weight on them.
This can damage the gas valve shaft.
C A R E A N D C L E A N I N G
To inquire about purchasing stainless steel appliance
cleaner or polish, or to find the location of a dealer
nearest you, please call our toll-free customer
service number:
1-800-243-0000
The control knobs may be
removed for easier cleaning.
Make sure the knobs are in
the OFF position and pull
them straight off the stems
for cleaning.
To reinstall a knob, hold it with
the OFF label at the top and slide it directly onto the
stem
NOTE: Unplug cooktop before cleaning control
knobs to prevent accidentally turning on
burners.
Surface burner knob
13