UrbanHello REMI User Manual page 5

UrbanHello
If your REMI displays 0069 or 0126 at startup an update is needed. To do this you have to transfer to
Connect REMI by USB
Connect your REMI by USB to your computer. Your
REMI appears as a USB key.
Transfer the file to REMI
Copy the update file to your REMI without putting it in
any folder. Check that there is no suffix such as "(2)",
"(3)" in the file name. If you file you transferred
contains a suffix, you must rename it so that the name
is exactly "update.bin".
update.bin
Plug REMI in
Connect your REMI to its power supply.
13, rue Saint Antoine, 75004 Paris
REMI the file "update.bin". Here's what to do:
contact@urbanhello.com
Download the Update file
Download the update file named "update.bin" by
pressing on the button below. Make sure that its name
is "update.bin" or "update". Do not add or delete ".bin"
to the name.
IMPORTANT: This is the latest version of REMI. There is
no need to open it or try to read it. This file is not
readable by any conventional software.
Download
UPDATE.BIN
Eject REMI from the computer
Eject your REMI from the computer in a secure way
(like a USB flash drive) - do not unplug it without
ejecting it.
REMI displays a number « > 200
If REMI displays a number greater than 200,
you have successfully updated it!
211
startremi.urbanhello.com
Installation
5