Haverland Designer RC Wave Setup Simple Manual

Heating Modes
 Frost Mode (this cannot be adjusted from 7°C and is essentially your off mode)
☾
Economy Mode (a lower level of heat, usually 4 °C below your comfort mode)
 Comfort Mode (your highest level of heat)
At any point, you can adjust the temperature of your comfort mode by pressing the + and –
buttons when the radiator is displaying the temperature.
Programming
Press the standby button  once to display the time or --:--. Then hold the same standby
button  in for 10 seconds or until the screen changes to this display:
programming are shown at the top of the screen. The days of the week are show as
numbers 1-7 at the right-hand side of the screen. Follow the steps below to set your
schedule for the entire week.
Use the + button to change the heating mode for the hour. The symbol at the bottom of the
screen will change to show you which mode you have selected. For example, if you want no
heat, select the  symbol.
To move onto the next hour, press the door button
the mode, or keep pressing the door button until you reach the hour you want to change.
Carry on changing the mode and advancing the hours of your
schedule until you reach the end of day 1. The little arrow on the
right-hand side will drop down to number 2 which represents
Tuesday and now you can repeat the process for each day of the
week.
Time & Day Setting
Once you have programmed all 7 days of the week, the screen
will move onto the time and day setting.
The screen first displays the day of the week, represented by the
numbers 1-7 on the right-hand side of the screen. Day 1 is
Monday, day 2 is Tuesday and so forth. The current day is shown
RC Wave Setup – Simple Guide
This is your programming screen. The hourly intervals for
. You can use the + button to change
Top Tip:
Want to skip the programming
section and go straight to
setting the time?
Go to the standby screen and
press and hold the standby
button until the screen
changes. Then press the
standby button once more to
enter the time and date screen.