Sony DREAM MACHINE 4-115-539-45(1) Operating Instructions

4-115-539-45(1)
FM/AM CD

Clock Radio

Operating Instructions
ICF-CD3iP
Dream Machine is a trademark of Sony Corporation.
©2008 Sony Corporation Printed in China
WARNING
 To clean the casing, use a soft cloth dampened
with a mild detergent solution.
 Never touch the wire of the external FM aerial
To reduce the risk of fire or electric shock, do
during a thunderstorm. Furthermore,
not expose this apparatus to rain or
immediately disconnect the AC power cord
moisture.
from the radio.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with newspapers, NOTES ON LITHIUM BATTERY
tablecloths, curtains, etc. And do not place lighted  Wipe the battery with a dry cloth to assure a
candles on the apparatus. good contact.
To reduce the risk of fire or electric shock, do not  Be sure to observe the correct polarity when
expose this apparatus to dripping or splashing, installing the battery.
and do not place objects filled with liquids, such
 Do not hold the battery with metallic tweezers,
as vases, on the apparatus.
otherwise a short-circuit may occur.
Disposal of Old Electrical
Do not install the appliance in a confined space,
& Electronic Equipment
such as a bookcase or built-in cabinet.
(Applicable in the European
Union and other European
As the main plug is used to disconnect the unit
countries with separate
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an collection systems)
abnormality in the unit, disconnect the main plug
This symbol on the product or on its packaging
from the AC outlet immediately.
indicates that this product shall not be treated
as household waste. Instead it shall be handed
Notice for customers: the following
over to the applicable collection point for
information is only applicable to equipment
the recycling of electrical and electronic
sold in countries applying EU directives
equipment. By ensuring this product is disposed
The manufacturer of this product is Sony
of correctly, you will help prevent potential
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
negative consequences for the environment
108-0075 Japan. The Authorized Representative
and human health, which could otherwise be
for EMC and product safety is Sony Deutschland
caused by inappropriate waste handling of this
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
product. The recycling of materials will help to
Germany. For any service or guarantee matters,
conserve natural resources. For more detailed
please refer to the addresses given in separate
information about recycling of this product,
service or guarantee documents.
please contact your local Civic Office, your
household waste disposal service or the shop
where you purchased the product.
Disposal of waste batteries
(applicable in the European
WARNING Union and other European
countries with separate
 Danger of explosion if battery is incorrectly
collection systems)
replaced. Replace only with the same or
equivalent type.
This symbol on the battery or on the packaging
 Replace the battery for the clock backup with a
indicates that the battery provided with this
Sony CR2032 lithium battery, and the battery
product shall not be treated as household waste.
for the remote commander with a Sony CR2025
On certain batteries this symbol might be used
lithium battery. Use of another battery may
in combination with a chemical symbol. The
present a risk of fire or explosion.
chemical symbols for mercury (Hg) or lead
 Battery may explode if mistreated. Do not
(Pb) are added if the battery contains more than
recharge, disassemble or dispose of in fire.
0.0005% mercury or 0.004% lead.
 Do not expose the batteries (battery pack or
By ensuring these batteries are disposed of
batteries installed) to excessive heat such as
correctly, you will help prevent potentially
sunshine, fire or the like for a long time.
negative consequences for the environment
 Dispose of used battery promptly. Keep away
and human health which could otherwise be
from children.
caused by inappropriate waste handling of the
"CAUTION-CLASS 1M INVISIBLE LASER
battery. The recycling of the materials will help
RADIATION WHEN OPEN AND
to conserve natural resources.
INTERLOCKS DEFEATED DO NOT VIEW
In case of products that for safety, performance
DIRECTLY WITH OPTICAL INSTRUMENTS"
or data integrity reasons require a permanent
connection with an incorporated battery, this
Features battery should be replaced by qualified service
staff only.
To ensure that the battery will be treated
 Brightness control (High/Mid/Low)
properly, hand over the product at end-of-life to
 Supplied audio cable for digital music players
the applicable collection point for the recycling
 Built-in CD player with CD-R/RW playback
of electrical and electronic equipment.
function
 FM/AM 2-band digital tuner
For all other batteries, please view the section
 30 Station Presets (20 FM, 10 AM)
on how to remove the battery from the product
 Automatic Time/Daylight Saving Time Setting
safely. Hand the battery over to the applicable
 No Power No Problem Alarm System
collection point for the recycling of waste
 Extendable Snooze time from 10 to 60 min
batteries.
For more detailed information about recycling
Precautions of this product or battery, please contact your
local Civic Office, your household waste disposal
service or the shop where you purchased the
 Play the unit on the power source specified in
product.
"Specifications".
 To disconnect the AC power cord (mains lead),
If you have any questions or problems concerning
pull it out by the plug, not the cord.
your unit, please consult your nearest Sony dealer.
 The unit is not disconnected from the AC
power source (mains) as long as it is connected
to the wall outlet, even if the player itself has Troubleshooting
been turned off.
 The nameplate and important information
Should any problem persist after you have made
concerning safety are located on the bottom
the following checks, consult your nearest Sony
exterior.
dealer.
 Since a strong magnet is used for the speaker,
keep personal credit cards using magnetic coding The clock flashes "0:00" due to a power
or spring-wound watches away from the unit to interruption.
prevent possible damage from the magnet.  The battery is low. Replace the battery. Remove
 Do not leave the unit in a location near a heat the old battery and install a new one.
source such as a radiator or airduct, or in a
The CD, radio, iPod or buzzer alarm does not
place subject to direct sunlight, excessive dust,
sound at the preset alarm time.
mechanical vibration, or shock.
 Check that "ALARM A" or "ALARM B" is
 Allow adequate air circulation to prevent
properly displayed.
internal heat build-up. Do not place the unit on
The CD, radio or iPod alarm is activated but
a surface (a rug, a blanket, etc.) or near
no sound comes on at the preset alarm time.
materials (a curtain) which might block the
 Has VOLUME been adjusted?
ventilation holes.
 Should any solid object or liquid fall into the unit,
The CD player does not operate.
unplug the unit and have it checked by qualified
 Did you close the CD compartment lid?
personnel before operating it any further.
 Did you insert the disc correctly?
The disc should be inserted with the label side
up.
 Dusty or defective disc — Clean the disc with
an optional cleaning cloth. Wipe the disc from
the center out.
iPod nano
 Take out the CD and leave the CD 4th generation
iPhone 3G iPod touch
(video)
compartment open for about an hour to allow
1st generation
condensation to evaporate.
There is no sound from the iPod.
 Make sure the iPod is securely connected.
 Adjust the VOLUME.
iPod nano
The iPod cannot be operated with this unit.
3rd generation
 Make sure the iPod is securely connected.
(video)
iPod classic
The iPod cannot be charged. iPhone
 Make sure the iPod is securely connected.
When daylight saving time begins, the clock
does not employ the daylight saving time
automatically.
 Make sure the clock is set correctly.
 Press and hold CLOCK and BRIGHTNESS/ iPod nano iPod nano
2nd generation iPod 1st generation
TIME ZONE simultaneously for at least two
(aluminum)
5th generation
seconds to employ the DST function.
(video)
Specifications
CD player section
System
iPod mini
Compact disc digital audio system
iPod iPod
4th generation 4th generation
Laser diode properties
(color display)
Emission duration: Continuous
Laser output: Less than 44.6 µW(This output is Notes
the value measurement at a distance of 200 mm  In these Operating Instructions, "iPod" is used
from the objective lens surface on the optical as a general reference for the iPod functions on
pick-up block with 7 mm aperture.) the iPod and iPhone, unless otherwise specified
Number of channels by the text or illustrations.
2  The connector of the unit is for sole use for
iPod. When you use devices that do not match
Frequency response
with the connector, connect to the AUDIO IN
20 - 20 000 Hz +1/–2 dB
terminal of this unit with the supplied audio
Wow and flutter
connecting cable.
Below measurable limit
 Sony cannot accept responsibility in the event
iPod section
that data recorded to iPod is lost or damaged
DC out: 5V
when using an iPod connected to this unit.
MAX: 500mA (AC only)
Radio section
Connecting the aerial
Frequency range
Band Frequency Channel step
To connect the AM loop
FM 87.5 – 108 MHz 0.05 MHz
aerial
AM 531 – 1 611 kHz 9 kHz
The shape and the length of the aerial is designed
530 – 1 610 kHz 10 kHz
to receive AM signals. Do not dismantle or roll up
General
the aerial.
1
Time display Remove only the loop part from the
24-hour system plastic stand.
Speaker 2
Set up the AM loop aerial.
Approx. 3.8 cm (1 / inches) dia. 20 Ω
1
2
Input
AUDIO IN jack (ø 3.5 mm stereo minijack)
Power output
1 W + 1 W (at 10% harmonic distortion)
Power requirements
230 V AC, 50 Hz
3
Connect the cords to the AM aerial
For clock back up: 3 VDC one CR2032 battery
terminals.
Dimensions
Cord (A) or cord (B) can be connected to
Approx. 145 × 156.8 × 115.8 mm (w/h/d)
either terminal.
(5 3 / × 6 1 / × 4 5 / inches) not including
4 4 8
projecting parts and controls Insert the cord while
Mass pushing down the
terminal clamp.
Approx. 1.3 kg (2 lb 13 oz) including power
supply unit
Supplied accessories
Remote commander (1)
Only insert up
AM loop aerial (1) to here.
B
A
Audio connecting cable (1)
Universal dock adapter for iPhone (1)
Universal dock adapter for iPhone 3G (1)
Design and specifications are subject to change
without notice.
4
Make sure the AM loop aerial is
Compatible iPod models
connected firmly by pulling softly.
The compatible iPod models are as follows.
Update your iPod to use the latest software before
Adjusting the AM loop aerial
you use it.
Find a place and an orientation that provide good
reception.
 Do not place the AM loop aerial near the unit
or other AV equipment, as noise may result.
Tip
Adjust the direction of the AM loop aerial for best
iPod nano AM broadcast sound.
5th generation
iPhone 3GS iPod touch
(video camera)
2nd generation
 


The CD, iPod & iPhone  and
VOLUME + buttons have a tactile dot.



CR2032


CR2025
Preparing the remote About the backup
commander battery
Before using the card remote commander for the To keep good time, this unit contains one CR2032
first time, remove the insulation film. (See Fig. battery inside of the unit as a backup power
-)
source.
The battery keeps the clock operating in the event
When to replace the battery
of a power interruption.
With normal use, the battery (CR2025) should
Note for customers in Europe
last for about six months. When the remote
The clock is preset at the factory, and its memory
commander no longer operates the unit, replace
is powered by the preinstalled Sony CR2032
the battery with a new one. (See Fig. -)
battery. If the "0:00" appears in the display when
the unit is connected to AC outlet for the first
Notes
time, the battery may be weak. In this case,
 Do not charge the battery.
consult a Sony dealer. The preinstalled CR2032
 When you are not going to use the remote
battery is considered part of the product, and is
commander for a long time, remove the battery
covered by the warranty.
to avoid any damage caused by leakage and
You are required to show "Note for customers in
corrosion.
Europe" (in this instruction) to a Sony dealer in
order to validate the warranty for this product.
Knowing when to replace the
battery
When the battery becomes weak, "" appears in
the display.
If a power interruption occurs while the battery is
weak, the current time and alarm will be
initialized.
Replace the battery with a Sony CR2032 lithium
battery. Use of another battery may cause a fire or
explosion.
Note
If "0:00" flashes in the display when the unit is
connected to AC outlet for the first time, the
battery may be weak. In this case, consult your
Sony dealer.
Replacing the battery
1
Open the CD compartment lid. (See Fig.
-)
2
Keep the AC plug connected to the AC
outlet and use a screwdriver to remove
the screw that secures the battery holder
at the bottom of the unit. (See Fig. -
)
3
Push the exhausted battery out from the
bottom of the battery holder and insert a
new battery with the  side facing up.
(See Fig. -)
4
Insert the battery holder back into the
unit and secure it with the screw. (See
Fig. -)
5
Press CD, iPod&iPhone, RADIO BAND,
AUDIO IN or SNOOZE/DATE/SLEEP
OFF to turn " " off in the display.

If the time in the display is
incorrect after the battery is
changed (Reset)
Press the Reset button with a pointed device. The
Reset button is in the small hole located in the
battery compartment.
Note
If you replace the battery, do not disconnect the
plug from the AC outlet. Otherwise, the calendar,
current time, alarm and station presets will be
initialized.
Battery Warning
If the unit is to be left unplugged for a long time,
remove the battery to avoid undue battery
discharge and damage to the unit from battery
leakage.
WARNING
There is a danger of explosion if the battery is
incorrectly replaced.
Replace only with the same or equivalent type
recommended by the equipment manufacturer.
If the battery compartment lid comes off
The battery compartment lid is designed to come
off when opened with excessive force. To put it
back on, see the illustration.
1
Insert the left hook of the lid into the left
hole in the unit.
2
Insert the right hook into the right hole.
3
Confirm the lid is securely attached.