Download Print this page

Magnum M9-RSB-12 Installation/Configuration

Sensor control board

Advertisement

Quick Links

MAGNUM SENSOR CONTROL BOARD
INSTALLATION & CONFIGURATION
PRODUCT CASING & DIMENSIONS
5.5625"
TECHNICAL DATA
Part Numbers (Frequency Dependant)
Input Power
Digital Relay Output Channels
Analog Output Channels
Digital Input Channels
Pressure Measurement
Temperature Measurement
Humidity Measurement
Wireless Protocol
Wireless Range
Enclosure
Dimensions
Operating Temperature
Storage Temperature
Magnum Innovations
5675 Hudson Industrial Pkwy, Suite 3 -
TOP VIEW:
4.4375"
2.75"
Hudson, OH 44236 -
phone 330.915.2382 - fax 330.529.5279 - www.magnum-innovations.com - info@magnum-innovations.com
LEFT SIDE:
RIGHT SIDE:
M9-RSB-12 (902 MHz - North America)
M8-RSB-12 (868 MHz - Europe and China)
MJ-RSB-12 (928 MHz - Japan)
24 VAC
(3) N.O. Dry Contracts Rated for 24 VAC 2A
(1) 0-10 VDC Rated for 30mA
(2) (24 VAC / 24 DC) (Source / Sink)
(2) (3 Wire / Pressure Transducer) (Source / Sink)
(9) (2 Wire NTC 10K)
(1) (3 Wire / Humidity Sensor 0-100%) (Source / Sink)
EnOcean Wireless Standard
150ft (50ft-150ft typical)
ABS Plastic
5.5625" x 2.75" x 1"
-40°F to 125°F (-40°C to 51.667°C)
32°F to 104°F (0°C to 32°C)
1"
*PATENT PENDING

Advertisement

loading

Summary of Contents for Magnum M9-RSB-12

  • Page 1 5.5625” x 2.75” x 1” Operating Temperature -40°F to 125°F (-40°C to 51.667°C) Storage Temperature 32°F to 104°F (0°C to 32°C) Magnum Innovations 5675 Hudson Industrial Pkwy, Suite 3 - Hudson, OH 44236 - phone 330.915.2382 - fax 330.529.5279 - www.magnum-innovations.com - info@magnum-innovations.com...
  • Page 2: Input / Output Overview

    2. INSERT WIRES INTO CORRECT RECEPTACLE ON THE SIDE OF THE DEVICE (see images above), AND THEN TIGHTEN SCREWS TO SECURE THE WIRES. Magnum Innovations 5675 Hudson Industrial Pkwy, Suite 3 - Hudson, OH 44236 - phone 330.915.2382 - fax 330.529.5279 - www.magnum-innovations.com - info@magnum-innovations.com...
  • Page 3: Installation

    INTRODUCTION The Magnum Temperature / Humidity / Pressure Sensor Control Board includes 2 digital inputs, 3 digital outputs and 1 analog output. When a 24 VAC power source is connected to the Magnum Sensor Control Board, the controller automatically makes the 3 relays, pressure sensors, 0-10 Volts, and two digital inputs available.
  • Page 4: Device Configuration

    Step One • Download airConfig™, based on your operating system, to your computer at download.magnum-innovations.net Step Two • Insert USB stick, specifically programmed by Magnum Innovations, into your computer Step Three • Power up your device prior to configuration Step Four •...
  • Page 5 • Installation and / or use on equipment that is not compliant with the current standards and regulations in force. DISCLAIMER Magnum Innovations shall not be liable for damages originated from the installation and / or use of the software that does not com- ply with the instructions of this manual.

This manual is also suitable for:

Mj-rsb-12M8-rsb-12