Self-Powered Wireless Key Card Switch
Mx-EKCS
Package Contents
•
Key Card Switch
•
Trim Plate
•
2 screws, 2 wall anchors
Tools Required
•
Power drill, 3/16" bit
•
Screwdriver
•
Leveling tool
Magnum Innovations
5675 Hudson Industrial Pkwy, Suite 3 -
Product Description
They Key Card Switch saves energy by signally HVAC, lighting, and electrical loads that
a room is unoccupied. It communicates wirelessly with compatible devices in a guest
room when a key card is inserted or removed from the slot.
The Key Card Switch can be mounted on most surfaces using the mounting plate or over
an existing wall box.
Features Include:
•
Determines occupancy based on guest room key card being inserted or removed
•
Harvests kinetic energy from the card action - no batteries
•
Installs easily in new or existing rooms - no wiring
•
Transmits room occupancy statues wirelessly to other energy saving devices in the room
•
Enables other devices to minimize energy use whenever the room is unoccupied
Specifications
Part numbers (frequency
dependent)
Power Supply
Inputs / Outputs
Transmission Range
EEP (EnOcean Equipment
Profile)
Card Slot Size
(Hotel Standard)
Dimensions
Weight
Environment
Agency Compliance
Hudson, OH 44236 -
phone 330.915.2382 - fax 330.529.5279 - www.magnum-innovations.com - info@magnum-innovations.com
M9-EKCS (902 MHz - North America)
M8-EKCS (868 MHz - Europe and China)
MJ-EKCS (928 MHz - Japan)
Mechanical energy harvesting (power is
generated by the motion of key card moving in
and out
• Slot for standard hotel key card
(2.125" W x 3.375" H x 0.034" D)
(54 mm W x 86mm H x 0.9mm D)
• Radio Frequency (RF) transmitter
80 ft. (25 m)
F6-04-01
4.72" H x 3.8" W x 0.43" D (at edge)
(120mm x 97mm x 11mm)
4.72" H x 3.81" W x 0.43" D (at edge)
(120mm x 97mm x 11mm)
3.5 oz. (99 g)
• Indoor use only
• 32° to 131° F (0° to 55°C)
• 5% to 95% relative humidity (non-condensing)
FCC, IC