Central Hydraulics 32879 Set Up And Operating Instructions Manual

20 ton shop press

Advertisement

20 ton shop press
set up and operating instructions
distributed exclusively by harbor Freight tools
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe this manual.
©
Copyright
2009 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 09g
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
32879
®
.

Advertisement

Table of Contents
loading

Summary of Contents for Central Hydraulics 32879

  • Page 1 20 ton shop press 32879 set up and operating instructions ® distributed exclusively by harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.
  • Page 2: Important Safety Information

    Air and alert symbol, indicates a hydraulic tools create sparks which hazardous situation which, if may ignite the dust or fumes. Page 2 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 3: Personal Safety

    Keep hands away from arbor plates and press pin during use. Page 3 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 4 When servicing a jack, use only identical replacement parts - refer to attached, product-specific parts list and diagram. Follow instructions in Page 4 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 5: Specifications

    Frame legs, lining up the bolt holes, as shown above. Insert the Foot Bolts (9) through the Press Frame (1) and the Feet (4), then secure in place with the Nuts (12). Page 5 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 6 Hang the Springs (7) on the Spring Figure 4 Bolts. Insert the Eye Bolts (8) into the holes in the Jack Plate (2) and secure in place with the Nuts (11). Page 6 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 7 Release Screw. Turn the Handle blow out the concrete dust from the counterclockwise to close the Valve drilled holes. Insert lag screw anchors Release Screw. (not included) into the holes. Page 7 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 8 Place the item to press between the Arbor Plates (3). Warning: Make sure there is no obstruction (such as a stray bolt or debris) under the Arbor Plates. Such items create an uneven surface Page 8 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 9: User Maintenance Instructions

    Springs from the Eye Bolts and remove the Jack from the Shop Press. Remove the Oil Filler Plug. Tip the Bottle Jack to allow the old hydraulic oil to drain out of the unit Page 9 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 10 Page 10 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 11: Parts List & Assembly Diagram

    If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 11 SKU 32879 For technical questions, please call 1-800-444-3353.
  • Page 12: Please Read The Following Carefully

    This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 Page 12 SKU 32879 For technical questions, please call 1-800-444-3353.

Table of Contents