Table of Contents
Advertisement
Table of Contents
Chapter 1.CAUTIONARY NOTES AND PRECAUTIONS ................................................................................................................. 3
Chapter 2.SPECIFICATIONS .............................................................................................................................................................. 4
Chapter 3.Keys and display indicators .................................................................................................................................................. 5
Chapter 4.Parts Description .................................................................................................................................................................. 6
Chapter 5.Unpacking the balance and Getting Started .......................................................................................................................... 7
Chapter 6.External Keyboard Connection (Optional) ........................................................................................................................... 9
Chapter 7.Main Menu and Function Setup .......................................................................................................................................... 11
7.1. Pill Counting - Setup .............................................................................................................................................................. 12
7.1.1.Pill Counting - Function Description ............................................................................................................................... 13
7.2.Compounding - Setup .............................................................................................................................................................. 14
7.2.1.Compounding - Function Description ............................................................................................................................. 15
Chapter 8.Maintaining the Database ................................................................................................................................................... 16
8.1.Delete by Date .......................................................................................................................................................................... 16
8.2.Delete One ............................................................................................................................................................................... 18
8.3.Delete All ................................................................................................................................................................................. 20
Chapter 9.Configuration ...................................................................................................................................................................... 23
9.1.Power Save and LCD Contrast ................................................................................................................................................. 23
9.2.RS232 Communication Port Adjustment ................................................................................................................................. 25
9.3.Time and Date Adjustment ...................................................................................................................................................... 26
9.4.Reset ......................................................................................................................................................................................
Chapter 10.Calibration ........................................................................................................................................................................ 30
10.1.1.Calibration Report .......................................................................................................................................................... 31
Chapter 11.Weighing (F1) .................................................................................................................................................................. 32
11.1.1.Zeroing the scale ........................................................................................................................................................... 33
11.1.2.Taring ............................................................................................................................................................................. 33
11.1.3.Clearing a Tare ............................................................................................................................................................... 35
Chapter 12.Pill Counting (F2) - Counting Prescription Drugs for the First Time ............................................................................... 36
Chapter 13.Pill Counting (F2) - Counting Prescription Drugs Which have been previously Stored i n the Scale's Database. ............ 42
Chapter 14.Printing a Pill Counting Receipt ...................................................................................................................................... 46
Chapter 15.NDC Verification - Integrated into Pill Counting ............................................................................................................ 47
Chapter 16.NDC Verification (F3) - Independent of Pill Counting .................................................................................................... 49
Chapter 17.Maintaining and Modifying the Average Piece Weight .................................................................................................. 51
Chapter 18.Data Entry Reminder ........................................................................................................................................................ 55
Chapter 19.Deviation Warning ........................................................................................................................................................... 58
Chapter 20.Advanced Pill Counting Accuracy (APA) ........................................................................................................................ 59
Chapter 21.Compounding and Recipe Making (F4) ............................................................................................................................ 61
Chapter 22.Saving and Printing Recipes ............................................................................................................................................. 63
Chapter 23.Using the Filling Meter ..................................................................................................................................................... 65
Chapter 24.Using the Scale's Alphabet for Data Entry ....................................................................................................................... 66
Chapter .25Sealing The scale .............................................................................................................................................................. 67
25.1.Paper Seal .............................................................................................................................................................................. 67
25.2.Wire Seal ................................................................................................................................................................................ 68
Chapter 26.Technical Information ...................................................................................................................................................... 70
Chapter 27.Common Errors and Troubleshooting ............................................................................................................................... 71
Chapter 28.Maintenance ..................................................................................................................................................................... 72
Chapter 29.Accessories ....................................................................................................................................................................... 73
Chapter 30.Replacement Parts ............................................................................................................................................................ 73
Chapter 31.Limited Warranty ............................................................................................................................................................ 74
Instruction Manual - TORBAL DRX 5 Series
28
2
Advertisement
Table of Contents
Summary of Contents for Torbal DRX 5 Series
-
Page 1: Table Of Contents
Instruction Manual - TORBAL DRX 5 Series Table of Contents Chapter 1.CAUTIONARY NOTES AND PRECAUTIONS ......................... 3 Chapter 2.SPECIFICATIONS ................................4 Chapter 3.Keys and display indicators ..............................5 Chapter 4.Parts Description .................................. 6 Chapter 5.Unpacking the balance and Getting Started .......................... 7 Chapter 6.External Keyboard Connection (Optional) ........................... - Page 2 Instruction Manual Important handling Cautions and Warnings Always handle your scale with care. Damage caused by improper handling is not covered under the scale’s warranty. Never drop or throw any articles onto the scale’s pan or onto any other parts of the unit! DO NOT let the scale fall or drop from its tabletop...
-
Page 3: Chapter 1.Cautionary Notes And Precautions
CHAPTER 1. CAUTIONARY NOTES AND PRECAUTIONS The TORBAL Precision scale is a sensitive and a delicate instrument. Always handle your scale with care. The correct location and proper environment affect the accuracy of your TORBAL Precision Scale. The best location for your scale: 1.Stable, horizontal, vibration-free surface... -
Page 4: Chapter 2.Specifications
Instruction Manual - TORBAL DRX 5 Series CHAPTER 2. SPECIFICATIONS Model DRX300 s DRX500 s 300g 500g Capacity Automatic Internal Calibration 0.001 Readability (d) Repeatability 0.001g (Standard Divination) +/- 0.002g Linearity Stabilization time Approx. 3sec (typical) -300g -500g Tare Range... -
Page 5: Chapter 3.Keys And Display Indicators
Instruction Manual - TORBAL DRX 5 Series CHAPTER 3. KEYS AND DISPLAY INDICATORS Primary Function Secondary Function Power On and Power Off Tare – used to tare the weighing pan Zero – used to zero the scale Number “6” key Enter –... -
Page 6: Chapter 4.Parts Description
Instruction Manual - TORBAL DRX 5 Series CHAPTER 4. PARTS DESCRIPTION Front View Rear View Scanner Stand Scanner Pan Base RJ Connector (Plugs into RS232 Connector (Plugs Scanner Cable AC Adaptor the scanner) into the scale) Level Indicator RS232 Serial Port... -
Page 7: Chapter 5.Unpacking The Balance And Getting Started
Instruction Manual - TORBAL DRX 5 Series CHAPTER 5. UNPACKING THE BALANCE AND GETTING STARTED 1. Carefully remove the scale, pan, scanner, and all of its components from the packaging and place them on a stable base where the scale will not be affected by any mechanical vibrations or air movements. - Page 8 Instruction Manual - TORBAL DRX 5 Series 4. Once the pan and scanner have been installed, level the scale by adjusting the rear feet until the level indicator shows the “air bubble” is in the center position of the sight glass. The level indicator is located on the rear left side of the scale.
-
Page 9: Chapter 6.External Keyboard Connection (Optional)
Instruction Manual - TORBAL DRX 5 Series To put the scale into standby mode, leave the AC adaptor plugged into both the scale and the wall outlet and press the Power “OFF” button ( ). The “OFF” indicator will light up in the upper left corner of the display signaling the scale is in standby mode, i.e.:... - Page 10 Instruction Manual - TORBAL DRX 5 Series 6.Select the function that will be used with the keyboard. 7.Locate the External Keyboard option and switch the setting to Enabled. 8.Exit the main menu. 9.Reboot the scale by turning it off and on.
-
Page 11: Chapter 7.Main Menu And Function Setup
Instruction Manual - TORBAL DRX 5 Series CHAPTER 7. MAIN MENU AND FUNCTION SETUP Main Menu is used to configure the scale’s functions. Configuration is done by enabling or disabling individual function features. 1.To enter the Main Menu function setup press the Menu key. -
Page 12: Pill Counting - Setup
Instruction Manual - TORBAL DRX 5 Series 7.1. Pill Counting – Setup The pill counting setup will allow you to configure the pill counting function by enabling or disabling different components of the function. 1.Access the Main Menu with the MENU key and use the up and down arrow keys to select the function to be configured. -
Page 13: Pill Counting - Function Description
Instruction Manual - TORBAL DRX 5 Series Follow Steps 1 through 3 to configure the functions. In order to exit the menu use the navigation keys to select Exit and press Enter. 7.1.1.Pill Counting – Function Description 1.Rx Verification – When enabled, this feature becomes an integrated part of the pill counting function. You will be asked to verify NDC codes before each counting transaction. -
Page 14: Compounding - Setup
Instruction Manual - TORBAL DRX 5 Series 7.External Keyboard – This feature must be enabled if an external PC keyboard is connected to the scale via the PS2 port. [Factory Default setting: Disabled] 8.Advanced Pill Counting Accuracy (APA) - APA is an advanced pill counting algorithm that can adjust for production LOT pill weight variations and provide even greater accuracy when counting large quantities. -
Page 15: Compounding - Function Description
Instruction Manual - TORBAL DRX 5 Series 3.The scale will highlight the selected parameter (enabled or disabled). Use the right and left arrow keys to toggle the parameter and set the function to disabled or enabled. 4.Once a selection has been made, press Enter to accept and confirm the setting. -
Page 16: Chapter 8.Maintaining The Database
Instruction Manual - TORBAL DRX 5 Series 3.Filling Meter – This feature should be used with the “reaming to fill feature”. The meter is a none-linear indicator that assists you in the filling process. The meter indicates a cut-off point at which the indicator becomes very sensitive, therefore it allows you to stop filling at the desired weight with greater accuracy. - Page 17 Instruction Manual - TORBAL DRX 5 Series 3. Once “ Maintaining the Drug Database” is highlighted press the ENTER key. 4. Using the navigation keys select “Delete by Date” and press ENTER. 5. The scale will display the following command: “Delete All Records which have not been updated or are older then X Month (s),”...
-
Page 18: Delete One
Instruction Manual - TORBAL DRX 5 Series 8. The scale will display the following command “Delete All Records which are Older then X Months? NO/YES”. To proceed with erasing unused entries select “YES” with the navigation keys. To abort select “NO”. - Page 19 Instruction Manual - TORBAL DRX 5 Series 2. Use the arrow navigations keys to select the function labeled “Maintaining the Drug Database”. 3. Once “Maintaining the Drug Database” is highlighted press the ENTER key. 4. Using the navigation keys select “Delete One” and press ENTER.
-
Page 20: Delete All
Instruction Manual - TORBAL DRX 5 Series 6. After scanning the code the scale will search the database and gather the necessary data. Command “Delete NDC # XXXXXXXXXX? NO/YES“ To proceed with erasure of this “NDC Code”, using the navigation keys select “YES”... - Page 21 Instruction Manual - TORBAL DRX 5 Series 2. Use the arrow navigations keys to select the function labeled “Maintaining the Drug Database”. 3. Once “Maintaining the Drug Database” is highlighted press the ENTER key. 4. Using the navigation keys select “Delete All” and press ENTER.
- Page 22 Instruction Manual - TORBAL DRX 5 Series 6. The scale will now display second warning indicating that all data will be permanently lost. To abort using the navigation key select “NO”, to proceed select “YES” and press ENTER. WARNING: Proceeding will result in formatting and erasing the entire memory bank. All data will be permanently lost.
-
Page 23: Chapter 9.Configuration
Instruction Manual - TORBAL DRX 5 Series CHAPTER 9. CONFIGURATION This function allows you to configure scale’s LCD Contrast, RS232 Communication Port, Time and Date, and Performance configuration. 9.1.Power Save and LCD Contrast 1. Enter the main menu by pressing the MENU key. - Page 24 Instruction Manual - TORBAL DRX 5 Series 4. To change the contrast of your LCD display, select “Contrast” and press the ENTER key. 5. Using the left and right arrow navigation keys to adjust the contrast of your display. 6. Once the contrast is at a desired level press the ENTER key to save the setting.
-
Page 25: Rs232 Communication Port Adjustment
Instruction Manual - TORBAL DRX 5 Series 8. Using the left and right arrow navigation keys select “OFF”. Once the back light is turned off press the ENTER key to save the setting. 9.2.RS232 Communication Port Adjustment 1. Enter the main menu by pressing the MENU key. -
Page 26: Time And Date Adjustment
5. Once the selection is made press the ENTER key to save the setting. To connect the DRX Scale to a TORBAL RXP-4 printer use the following settings. Baud Rate: 9600... - Page 27 Instruction Manual - TORBAL DRX 5 Series 2. Use the navigation keys to select “Configuration” and press ENTER. 3. From the configuration menu select “Time and Date” and press ENTER. 4. To adjust the time, using the navigation keys select “Time” and press ENTER.
-
Page 28: Reset
Instruction Manual - TORBAL DRX 5 Series 6. To change between “AM” and “PM” use the down arrow key and press the ENTER key (after pressing the arrow key “AM” will not change to “PM” until the ENTER key is pressed). - Page 29 Instruction Manual - TORBAL DRX 5 Series 2. Use the navigation keys to select “Configuration” and press ENTER. 3. From the configuration menu select “Reset” and press ENTER. 4. Command “Restore Default Settings? NO/YES” will be displayed. 5. To restore default configuration settings use the arrow keys to select “YES” and press ENTER.
-
Page 30: Chapter 10.Calibration
CHAPTER 10. CALIBRATION The DRX 5 Series scales are equipped with Automatic Internal Calibration. Calibration is automatically performed every time the scale is turned ON or initialized. Calibration is also performed every time the internal temperature of the scale changes by 1° C or at 2 hour time intervals (whichever comes first). -
Page 31: Calibration Report
Instruction Manual - TORBAL DRX 5 Series 4. In order to confirm internal calibration and proceed with calibration press the calibration key ∇ again. 10.1.1.Calibration Report After calibration has been performed, a calibration report can be printed. The calibration report includes data of the current internal calibration weight. -
Page 32: Chapter 11.Weighing (F1)
Instruction Manual - TORBAL DRX 5 Series CHAPTER 11. WEIGHING (F1) 1.To begin weighing, press the power button ( ) to turn the scale on. 2. The scale will initialize and calibrate itself, and then automatically enter Weighing Mode. The scale is ready to... -
Page 33: Zeroing The Scale
Instruction Manual - TORBAL DRX 5 Series 11.1.1.Zeroing the scale 1.The DRX is armed with the Auto Zero Setting Mechanism (AZSM). AZSM automatically maintains a center of zero condition within +/- .5d or 5mg. 2.The scale may be re-zeroed manually to obtain a new center of zero. To re-zero the scale manually with a weight that is out of the AZSM range, make sure the weight and the stabilization indicator are shown on the display, i.e.:... - Page 34 Instruction Manual - TORBAL DRX 5 Series 2.To tare the weighing container, place it in the middle of the pan. The container’s weight will be shown on the display. 3.Once the stabilization indicator appears on the display, the container is ready to be tared. To tare the container, press the T button.
-
Page 35: Clearing A Tare
Instruction Manual - TORBAL DRX 5 Series 11.1.3.Clearing a Tare 1.To clear the tare, remove the tared object along with the NET weight from the pan. The scale will then display a negative NET tare result. 2.To clear the tare, press the T button. -
Page 36: Chapter 12.Pill Counting (F2) - Counting Prescription Drugs For The First Time
Instruction Manual - TORBAL DRX 5 Series CHAPTER 12. PILL COUNTING (F2) – COUNTING PRESCRIPTION DRUGS FOR THE FIRST TIME ** Steps referring to optional features that are disabled by default are italicized. If this is the first time a particular drug is counted, and it has not been stored in the scale’s database, follow the steps below. - Page 37 Instruction Manual - TORBAL DRX 5 Series 3. Wait for the weight to stabilize and press the T key to tare. 4. Once the scale has finished taring, “SCAN” will appear on the display, indicating that the scale is ready to scan the NDC code associated with the drug.
- Page 38 Instruction Manual - TORBAL DRX 5 Series 7. If Drug Labeling has been enabled, “DRUG NAME” will be displayed indicating that you should key in the name of the drug. To key in the drug name you may use the scale’s alphabet (Chapter 24) or use an external keyboard (Chapter 6).
- Page 39 Instruction Manual - TORBAL DRX 5 Series 11. The weight of the sample will be displayed as it is placed on the pan. 12. Once the weight of the sample stabilizes and the stability indicator appears on the display, press the ENTER key to confirm and accept the sample weight.
- Page 40 Instruction Manual - TORBAL DRX 5 Series 14. The scale will store the sample weight in the internal memory and the display will indicate to begin filling. The word “FILL” will flash on the display for approximately five seconds. At any time during the Fill command, add the remaining pieces.
- Page 41 Instruction Manual - TORBAL DRX 5 Series 17. Note: If the Remaining to Fill feature has been enabled, a count down meter will be displayed in the upper right corner of the display. If too many pills are placed into the container the OVERFILL indicator will be displayed.
-
Page 42: Chapter 13.Pill Counting (F2) - Counting Prescription Drugs Which Have Been Previously Stored I N The Scale's Database
Instruction Manual - TORBAL DRX 5 Series CHAPTER 13. PILL COUNTING (F2) – COUNTING PRESCRIPTION DRUGS WHICH HAVE BEEN PREVIOUSLY STORED IN THE SCALE’S DATABASE ** Steps referring to optional features that are disabled by default are italicized. If a particular drug has been previously counted in the scale, and it has not been stored in the scale’s database, follow the steps below. - Page 43 Instruction Manual - TORBAL DRX 5 Series 4. Wait for the weight to stabilize and press the T key to tare. 5. Once the scale has finished taring, “SCAN” will appear on the display, indicating that it is ready to scan the NDC code associated with the drug.
- Page 44 Instruction Manual - TORBAL DRX 5 Series 8. If the Remaining to Fill feature has been enabled, the scale will ask for the number of pills to be counted in the transaction. Using the scale’s keypad or an external keyboard, key in the number of pills to be counted and press Enter.
- Page 45 Instruction Manual - TORBAL DRX 5 Series 11. The display will now indicate the number of pieces placed in the container. Stop filling if the desired count has been reached. 12. Note: If the Remaining to Fill feature has been enabled, a counting down meter will be displayed in the upper right corner of the display.
-
Page 46: Chapter 14.Printing A Pill Counting Receipt
Instruction Manual - TORBAL DRX 5 Series CHAPTER 14. PRINTING A PILL COUNTING RECEIPT Once a counting transaction has been completed a receipt of the count can be printed if an external printer is connected to the scale. To print a counting receipt, follow the steps below: 1. -
Page 47: Chapter 15.Ndc Verification - Integrated Into Pill Counting
Instruction Manual - TORBAL DRX 5 Series CHAPTER 15. NDC VERIFICATION – INTEGRATED INTO PILL COUNTING NDC Verification can be used within the pill counting feature or as an independent function. Note: When using the scale without the Rx PC software, the verification feature may be performed only if a 10 or 11 digit NDC barcode is printed on the Rx label in a format that is compatible with the scanner. - Page 48 Instruction Manual - TORBAL DRX 5 Series 4. Scan the second code by placing it under the scanner light. Once the code has been scanned, the scale will check whether there is a match between the two codes. The code will appear on the display in a field labeled “Rx NDC # _ _ _ _ .“...
-
Page 49: Chapter 16.Ndc Verification (F3) - Independent Of Pill Counting
Instruction Manual - TORBAL DRX 5 Series CHAPTER 16. NDC VERIFICATION (F3) – INDEPENDENT OF PILL COUNTING To enter the NDC verification feature, press the F3 key at any time. 1. “SCAN 1” will appear on the display, indicating that you should scan the first NDC code associated with the drug (usually the supply bottle). - Page 50 Instruction Manual - TORBAL DRX 5 Series 4. Scan the second code by placing it under the scanner light. Once the code has been scanned, the scale will check for a match between the two codes. The code will appear on the display in a field labeled “Rx NDC # _ _ _ _ .“ If the match is wrong, the word “FAILED”...
-
Page 51: Chapter 17.Maintaining And Modifying The Average Piece Weight
Instruction Manual - TORBAL DRX 5 Series CHAPTER 17. MAINTAINING AND MODIFYING THE AVERAGE PIECE WEIGHT In order to assure the highest long-term counting accuracy, it is strongly recommended that the database be periodically updated, as drugs may be reformulated, modified and released under new production lot numbers. - Page 52 Instruction Manual - TORBAL DRX 5 Series 4. Wait for the weight to stabilize and press the T key to tare. 5. Once the scale has finished taring, “SCAN” will appear on the display, indicating that it is ready to scan the NDC code associated with the drug.
- Page 53 Instruction Manual - TORBAL DRX 5 Series When the sigma key ( ) is pressed, the scale will allow the drug data to be changed. 10. If Drug Labeling has been enabled, “DRUG NAME” will be displayed, indicating that it is ready to key in the name of the drug.
- Page 54 Instruction Manual - TORBAL DRX 5 Series 13. Once the sample size has been selected, the scale will display “SAMPLE WEIGHT” indicating that it is ready to weight the sample. Manually count the sample and place it in the container located on the pan.
-
Page 55: Chapter 18.Data Entry Reminder
Instruction Manual - TORBAL DRX 5 Series CHAPTER 18. DATA ENTRY REMINDER When enabled, the feature reminds you to update drug data if a pre-programmed amount of time has passed since the last entry. Using this feature assures the highest long-term counting accuracy. It is strongly recommended to update the database periodically as drugs may be reformulated, modified and released under new production lot numbers. - Page 56 Instruction Manual - TORBAL DRX 5 Series 3. Once the sample size has been selected, the scale will display “SAMPLE WEIGHT” indicating to weight the sample. Manually count 10 pills and place them in the container located on the pan.
- Page 57 Instruction Manual - TORBAL DRX 5 Series Update Average Piece Weight? – NO 1. After selecting NO, the scale will allow you to postpone the reminder for an additional period of time or to turn it off. 2. To postpone the reminder use the navigation keys to select a new number of days and press Enter.
-
Page 58: Chapter 19.Deviation Warning
Instruction Manual - TORBAL DRX 5 Series CHAPTER 19. DEVIATION WARNING Deviation Warning: When enabled the feature allows to check for possible discrepancy between the stored average piece weight, and the average piece weight of the drug which is counted. The feature signals if a deviation greater than +/- 2% is found. -
Page 59: Chapter 20.Advanced Pill Counting Accuracy (Apa)
Instruction Manual - TORBAL DRX 5 Series 5. If the stability indicator appears and the scale does not sound a beep nor the “2% DEV” or “3% DEV" command appears on the display, a deviation of greater than 2% was not found. - Page 60 Instruction Manual - TORBAL DRX 5 Series 3. Once the scale is stable it will calculate a new average piece weight. The scale will sound a beep and the APA indicator will appear in the lower left corner of the display. At this point the scale has calculated a new average piece weight based on the pieces which are counted.
-
Page 61: Chapter 21.Compounding And Recipe Making (F4)
Instruction Manual - TORBAL DRX 5 Series CHAPTER 21. COMPOUNDING AND RECIPE MAKING (F4) ** Steps referring to optional features that are disabled by default are italicized. 1. To enter the compounding mode, press F4. 2. “TARE” will appear on the scale’s display, indicating that it is ready to tare a counting container. - Page 62 Instruction Manual - TORBAL DRX 5 Series 6. If the Remaining to Fill feature is enabled, the scale will indicate that it is ready to key in the weight of the ingredient to be weighed. Using the scale’s keypad, key in the weight of the ingredient and press Enter.
-
Page 63: Chapter 22.Saving And Printing Recipes
Instruction Manual - TORBAL DRX 5 Series To view the recipe total, or to print and save recipes press the Sigma (∑) key before taring and entering an ingredient. CHAPTER 22. SAVING AND PRINTING RECIPES To view the recipe total, or to print and save recipes press the Sigma (∑) key before taring and entering an ingredient. - Page 64 Instruction Manual - TORBAL DRX 5 Series F3 View.: Press F3 to view saved recipes. F5 Done.: Press F5 to finish and save the recipe. To save the recipe before exiting, press F3, as indicated on the display. To exit without saving, press F5.
-
Page 65: Chapter 23.Using The Filling Meter
Instruction Manual - TORBAL DRX 5 Series CHAPTER 23. USING THE FILLING METER If the Remaining to Fill feature is enabled, the remaining to fill weight will be displayed in the upper left corner of the display. The filling meter will assist you in the filling process. The filling meter helps to stop filling at the desired target weight which was entered as the remaining to fill weight. -
Page 66: Chapter 24.Using The Scale's Alphabet For Data Entry
Instruction Manual - TORBAL DRX 5 Series CHAPTER 24. USING THE SCALE’S ALPHABET FOR DATA ENTRY If an external PC Keyboard is not connected to the scale and you are using “Drug and LOT” labeling use the scale’s keypad to enter letters of the alphabet and other characters. Each number key has an assigned set of characters and letters. -
Page 67: Chapter .25Sealing The Scale
Instruction Manual - TORBAL DRX 5 Series CHAPTER 25. SEALING THE SCALE Depending on the laws of the state in which it is used, the scale may have to be sealed by an Weights and Measures official. The scale can be sealed either with paper or with wire. -
Page 68: Wire Seal
Instruction Manual - TORBAL DRX 5 Series 3.Once the flush sealing screw is in place, the paper seal can be simply placed over the opening as shown in the picture below. WARNING: Do not attempt to screw the flush sealing screw all the way in. Stop when the screw is flush with the casing of the scale. - Page 69 Instruction Manual - TORBAL DRX 5 Series 2.The seal may then be placed over the wire. Do not attempt to remove the calibration screw as it will rip the wire and break the seal.
-
Page 70: Chapter 26.Technical Information
Instruction Manual - TORBAL DRX 5 Series CHAPTER 26. TECHNICAL INFORMATION... -
Page 71: Chapter 27.Common Errors And Troubleshooting
Instruction Manual - TORBAL DRX 5 Series CHAPTER 27. COMMON ERRORS AND TROUBLESHOOTING Error Cause Explanation / Solution Scale load at start up exceeds 10% of the The pan was not empty while the scale Load error! scale MAX capacity was initiating at startup. -
Page 72: Chapter 28.Maintenance
Instruction Manual - TORBAL DRX 5 Series If any of the following errors are displayed, please contact technical support at (973)-473-6900 EEPROM1 memory error (shortage of memory, memory is damaged, or EEPROM1 Error check sum error) EEPROM2 Error EEPROM2 memory error (shortage of memory, memory is damaged, or... -
Page 73: Chapter 29.Accessories
Instruction Manual - TORBAL DRX 5 Series CHAPTER 29. ACCESSORIES Description Part No. Draft Shield Cover DRX9120 RXP-4 Thermal Printer DRX9130 RS232 PC Cable DRX9140 CHAPTER 30. REPLACEMENT PARTS Description Part No. A/C Adaptor DRX9150 Pan Assembly DRX9160 RS232 Printer Cable... -
Page 74: Chapter 31.Limited Warranty
Instruction Manual - TORBAL DRX 5 Series CHAPTER 31. LIMITED WARRANTY PURCHASER’S 12-MONTH WARRANTY Warranty is valid only if the attached warranty registration card is completed and returned within 30 days. This product is a precision device made to exacting standards of scientific accuracy. It is guaranteed to have been adjusted and inspected for proper workmanship and performance, and certified for its currently advertised specifications before shipment.
Need help?
Do you have a question about the DRX 5 Series and is the answer not in the manual?
Questions and answers