Troubleshooting; Factory Reset: How Do I Factory Reset My Clock; Dashes Temperature: Why Does My Temperature Sensor Show Dashes On Your Clock; My Temperature Readings On My Clock Match The Weather Report - Lacrosse BBB86088 Faqs

Hide thumbs Also See for BBB86088:

Instruction manual (36 pages)

Table of Contents

Activate or Deactivate alarm:

•

The alarm is active when set. From normal time display, press and release the ALARM button

to deactivate or activate the alarm.

•

Alarm icon (bell) will show then active.

Snooze:

•

When your alarm sounds, press the SNOOZE button to silence alarm for 10 minutes. The

alarm bell will flash.

•

Press any button except SNOOZE to silence the alarm for 24 hours.

FACTORY RESET: HOW DO I FACTORY RESET MY CLOCK?

•

A factory reset is a great way to return your clock to "out of the box" condition.

To factory reset your clock:

1. Remove batteries from your sensor and your clock. Press any button on your clock 20 times

to help discharge collected power.

2. Wait 15 minutes then insert batteries into the sensor and your clock and allow both pieces to

sit together for 15 minutes.

DASHES TEMPERATURE: WHY DOES MY TEMPERATURE SENSOR SHOW DASHES

Dashes indicate the connection is lost between your clock and the outdoor sensor.

•

My first thought is always to check that my

now is not, low batteries are the most common connection problem.

•

Next, check your

distance, resistance and

at the same location, this is likely not the issue. However sometimes there is new growth on

trees or bushes that causing another barrier. Radio Frequency (RF) signal does not travel

well through foliage due to the moisture content.

•

Occasionally adding a new wireless electronic device to the home will cross the signal path

for the sensor. If this occurs try moving your clock a few feet or turning your clock 90

degrees for a better angle to receive the sensor signal.

•

When you have good batteries, and good location, hold the + button for three seconds to

search for your sensor. If you regain connection while the sensor is mounted, great. If you

do not regain connection, bring the sensor within 10 feet of your clock and search again.

MY TEMPERATURE READINGS ON MY CLOCK MATCH THE WEATHER REPORT?

•

Your temperature readings are from your sensor at your location. Your local reporting clock

can be miles away so readings will differ.