1. Manuals
  2. Brands
  3. SDS Manuals
  4. Scales
  5. IDS-802
  6. User manual

SDS IDS-802 User Manual

Weighing scale
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Weighing Scale
IDS-802
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IDS-802 and is the answer not in the manual?

Questions and answers

Summary of Contents for SDS IDS-802

  • Page 1 Weighing Scale IDS-802 User Manual...
  • Page 2 A. MAIN SPECIFICATION Model: IDS-802 Weighing scale Capacity: 3kgx0.1g,6kgx0.2g,15kgx0.5g,30kgx1g Accuracy: Grade III, n=30,000 Display： Single 6 digits LCD with Blue Backlit 1 x LCD Display is optional Keys: UNIT,COU/AFF,TAR/CAL Power supply: AC 220V/50Hz or DC 6V/4Ah Operating temperature/Humidity: 5°C~35°C / ≤85％RH B.
  • Page 3 point, but still within zero set range, the scale will set zero automatically; if out of range, it is necessary to adjust the zero point or recalibrate or reset. 3.MANUAL ZERO SETTING (automatically) 3.1 In weighing mode, when there is some error when unloaded, press [TAR/CAL] to make the scale to be zero.
  • Page 4 7.COUNT 7.1 Average Piece Weight Setting Put a container for parts on the platter or not (if not necessary), press [COU/AFF], the scale will display "10" (flashing), then put 10 pcs parts on the container or platter, press [COU/AFF]to confirm, the scale will enter into waiting mode by displaying "------"...
  • Page 5 C. CALIBRATION Before using the scale, please check the accuracy of the scale . If not accurate, please calibrate the scale with standard calibration weights. 1 Turn on the scale for preheating 10 minutes. 2 Make sure the scale is unloaded and in zero mode, long press [TAR/CAL] to initiate calibration (do not release key-press until "--CAL-- "...
  • Page 6 E. CHAREABLE BATTERY 1.Turning on the AC Power, the scale will charge the battery automatically. 2. Only when you turn off the AC power and push [ON/OFF] key, battery works. 3.When you use battery first time, you should charge the battery for 20 hours in order to prevent low voltage resulted from the self leakage of the battery.
  • Page 7 otherwise electronic components will be damaged and electric shock is likely to happen. 4. During operation, if trouble occurs, operator must pull off the power supply plug immediately. 5. From invoice date, the scale has one-year free repair period. If any non-artificially obstacle about the scale happens under correct using conditions within this period, the user is allowed to send the product with its guarantee card back to our factory for free repair.

Table of Contents