Specifications For This Scale - Health O Meter 498KL User Instructions

CAUTIONS AND WARNINGS (CONTINUED)
• This equipment has been tested and found to comply with the EMC limits for the Medical
Device Directive 93/42/EEC (EN 55011 Class A and EN 60601-1-2). These limits are
designed to provide reasonable protection against harmful interference in a typical medical
installation. The equipment generates, uses and may radiate radio frequency energy and, if
not installed and used in accordance with these instructions, may cause harmful interference
to other devices in the vicinity. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference with other
devices, which can be determined by turning the equipment off and on, the user is
encouraged to try to eliminate the interference by one or more of the following measures:
o Reorient or relocate the receiving device.
o Increase the separation between the equipment.
o Plug the equipment into an outlet on a circuit different from that to which the other
device(s) is connected.
o Consult Customer Service or a field service technician for help.

SPECIFICATIONS FOR THIS SCALE

General
The model 498KL remote display digital scale uses highly sophisticated microprocessor
technology. This precision scale is designed to provide accurate, reliable and repeatable weight
measurements. In addition, each scale is designed to provide the user with features that make
the weighing process simple, fast, and convenient.
Weight can be displayed in pounds (lb) or in kilograms (kg). For privacy and convenience in
use, the scale features a remote display head which may be held by the operator, placed on a
table or other flat surface, or mounted on a wall. This scale can be powered using AC
adapter ADPT31 (USA or Canada) (not included) or ADPT30WA (international, plug kit)
(not included) or by 6 - AA batteries (included).
498KL Scale Specifications
Capacity and Resolution
Power Requirements
Environmental
Physical Dimensions
DEFINITION OF SYMBOLS
Attention, Consult Accompanying Documents
Type B Applied Parts
500 lb x 0.2 lb (220 kg x 0.1 kg)
120 - 240AC, 50 - 60Hz - 9V DC adapter or 6 - AA batteries
Operating temperatures: 50°F to 104°F (10°C to 40°C)
Storage temperatures: 32°F to 122°F (0°C to 50°C)
Maximum Humidity: 95% RH
Platform
Length: 16 1/2" (419 mm)
Width: 13 3/4" (349 mm)
Height: 2 3/8" (60 mm)
Weight: 14 lb (6.35 kg)
40C
Temperature range
(10°C to 40°C / 50°F to 104°F)
10C
AC to DC power supply
4
Display assembly
Length: 8" (204 mm)
Width: 4 1/2" (117 mm)
Height: 2" (49 mm)
Weight: 1.2 lb (0.54 kg)