Summary of Contents for Gira Energy Profile
1347 26/27/28
Page 1
Installation and operating manual Energy Profile 1341 26/27/28 1347 26/27/28 Energy Profile with lighting element 1342 26/27/28 1348 26/27/28 Light Profile 1343 26/27/28 Light Profile, small 1344 26/27/28...
Table of Contents Description............5 Construction ............. 5 Energy Profile installation ......... 6 Connecting the wiring........7 Installing and replacing lamps ......8 Installation of slats element ......8 Empty connection units ........9 Specifications..........10 Manufacturer's warranty......... 10...
Energy Profiles, such as (4) profile telephone and loudspeaker sockets or light switches. (5) profile base Gira Energy Profiles are available in four different models in the colours pure white, anthracite grey and aluminium: • Energy Profile with three SCHUKO socket outlets Order no.
Energy Profile installation Condensation opening Before installing the Energy Profile, open the condensation exit on the bottom of the profile base. To do so, break out the tab for the opening and remove any rough edges using a file. The Energy Profile can be fitted with just one screw.
Connecting the wiring Direct screw fitting On a firm underlying surface, such as brick, con- Note! crete or asphalt, the Energy Profile can be The installation and assembly of electrical equip- installed directly on the ground. ment may only be performed by a qualified elec- trician.
Installing and replacing lamps Installation of slats element A Compact fluorescent lamp with E27 socket is An optional slats element can be used in order to used in the Energy Profile as a light source. More focus the Energy Profile lighting element on information about suitable lamps can be found in objects or paths.
Certain System 55 base elements require a dif- ferent intermediate plate and spring cover from the TX_44 range. An overview of which base ele- ments can be combined with which intermedi- ate plates is provided in the Gira catalogue.