Table of Contents
Advertisement
Quick Links
Progress Plus Advanced Keypad User Guide
Setting the Base Sensitivity
Using the keypad, hold
flashes "RST".
Press and hold
button (for upto 5 seconds). The handset should display either:
10.5 - 10kg (high sensitivity)
Hold
button until the desired sensitivity setting is shown, then release the button.
To complete the process, hold
Setting Upper & Lower Height Restrictions
To set a lower height restriction, press and hold
Complete the process by holding
To set an upper height restriction, press and hold
Complete the process by holding
To reset the height restriction, press
Select Units (inches/cm)
Press the
button until the base reaches its lowest position. Press the
"RST".
Press and hold the
button to switch settings. The display will automatically return to flashing "RST".
Press the
button until the base has lowered a little more and then slightly risen. The new setting will be displayed.
Repeat the process to switch back.
Setting a Memory Preset
At the desired height, press the
preset buttons (1, 2 or 3). The position has been saved.
The preset positions can now be used by pressing the relevant button (1, 2 or 3).
Using the
and
buttons, move the base to the next desired position and repeat the process.
Lock/Unlock the Keypad
To lock the keypad, press and hold
Release the button.
To unlock, press and hold
button.
Contact us.
Goole Office, Showroom & Factory
London Office & Showroom
Email. sales@elite-furniture.co.uk
www.elite-furniture.co.uk
button until the base reaches the lowest point. Continue to hold
|
10.6 - 15kg (medium sensitivity)
button until the desk lowers then slightly rises.
until the desired height is reached. Press
M
until the display flashes '000'.
until the desired height is reached. Press
M
until the display flashes '999'.
M
and release. Then hold
M
button once. The display will change to "S hyphen". Select and press one of the memory
M
button for 8 seconds until the LED display switches to "S hyphen" and then to "LOC".
M
button for 8 seconds until the LED display switches to display the height display. Release the
01405 746000
0207 490 4909
|
10.7 - 20kg (low sensitivity)
M
until the LED display shows '555'.
button again for 5 seconds until the LED flashes
button until the LED display
M
, followed by
.
M
, followed by
.
Rev. 2
Advertisement
Table of Contents
Summary of Contents for Elite Progress Plus
- Page 1 Progress Plus Advanced Keypad User Guide Setting the Base Sensitivity Using the keypad, hold button until the base reaches the lowest point. Continue to hold button until the LED display flashes “RST”. Press and hold button (for upto 5 seconds). The handset should display either: 10.5 - 10kg (high sensitivity)
- Page 2 Sit-Stand App User Guide Compatible when purchased with Progress Plus Advanced Keypad PPKP/ and Keypad Dongle PPKPD STEP 1 STEP 2 STEP 3 Get Started Download Connect Your Device Download the Sit-Stand app from the Insert the Keypad Dongle (PPKPD) into App Store on IOS Devices or Google the port marked ‘F’...
- Page 3 You will be able to select a tone from your devices standard alerts. Times ‘Phys Ed’ Column Contact us. Goole Office, Showroom & Factory 01405 746000 London Office & Showroom 0207 490 4909 Email. sales@elite-furniture.co.uk www.elite-furniture.co.uk Rev. 2...
- Page 4 Progress Plus Fault Resolution Guide This guide can be used to resolve minor faults that may occur when operating Progress Plus workstations. Faults will be indicated by an error code presented on the keypad or within the mobile app. Resetting the Base A number of errors can be resolved by performing a system reset.
Need help?
Do you have a question about the Progress Plus and is the answer not in the manual?
Questions and answers