F&V Z1200VC CTD-Soft Quick Start Manual page 2

1
Getting Started
1 Mount
Offset mounting plate w/ baby receiver (16mm)
16 mm
1
Combo Pin
2 Power
Two power options
1
AC adapter (
for Studio Pack or Rental Kit)
2
V-mount Li-ion battery (
for Location Pack or Rental Kit)
2
100 - 240 V
2 × V-mount Li-ion Battery
12-24 V 12-24 V
2 2
3 Let's do this!
Turn the light ON
3
3
2
Functions
1 Mode Selection | <MENU> & <↑> <↓>
Start in the main menu interface.
From other interface pages press <MENU> to return to the main menu.
Select Mode: Press <↑> <↓> to move the cursor to select the mode or setting menu.
Enter Mode: Press <MENU> to enter the selected mode or setting interface.
2 Adjusting Parameters | <Adjustment Knob> & <↑> <↓>
Enter a lighting mode or setting interface rst:
Select: Press <↑> <↓> to move the cursor to the parameter of choice.
Adjust: Turn top <Adjustment Knob> to quickly or bottom <Adjustment Knob> to
slowly adjust the selected parameter.
Menu
Confirm / Return
3 Presets | <MODE> + <1~4> & <1~4>
Four scene presets can be saved independently in each mode. Please enter one of the lighting
mode operation interfaces rst:
Save: To save the light parameters in the current mode to a preset, press and hold <SAVE> and
press one of the preset number buttons <1> <2> <3> <4>.
Recall: To recall a saved preset in the current mode, press one of the saved preset number
buttons <1> <2> <3> <4>.