Functional Specifications - Adastra Systems NPC-486E User Manual

1.2

Functional Specifications

CPU
RAM:
BIOS Memory:
PC System Chip Set: VLSI VL82C486, VL82C113A which contain the following:
Integrated I/O Chip: A Super I/O chip which contains the following:
Speaker Driver:
Display:
Network:
Bus Expansion:
Solid State Disk:
486SX or 486DX at 25 or 33MHz;
486DX2 at 50 or 66MHz (internal)
486DX4 at 75 or 100MHz (internal)
1M, 2M, 4M, 8M, 16M, or 32M
One 128K byte 29F010 Flash - Field upgradeable
82C37A DMA controller (2)
8254 Counter/Timer
82C59A Interrupt controller (2)
82284 Clock Controller
82288 Bus controller
PC/AT Keyboard controller
PS/2 Mouse
Real-time Clock
PC/AT compatible floppy disk controller
Western Digital compatible IDE controller
Two 16550 serial UARTs, RS-232C
One (bi-directional) (PC/AT printer) parallel port, TTL
8 ohm, .5W speaker drive capability
VGA compatible adapter, 32-bit local-bus, 512K (1M optional)
16M colors; 640x480, 800x600, and 1024x768 resolution
Simultaneous CRT with flat panels: LCD, EL, and Plasma
Windows™ hardware accelerator (factory order option)
On-board LCD bias (positive or negative) voltage
On-board display power sequencing
16-bit Ethernet, Novell 2100 NIC compatible
Drivers for NDIS, ODI, NetBIOS, TCP/IP, UNIX stream
Network Boot support
10BASE-T on-board, 10BASE2 or 10BASE5 optional
PC/104 ISA bus connection, up 6" cable extension 6 card drive
capability
Up to 4 Mbytes Flash Solid State Disk (SSD). One 32 pin socket
for additional SRAM, EPROM, EEPROM, or Flash SSD
2