Locating a station by
name
— List-up
1
Press (LIST) momentarily.
The name assigned to the station currently
tuned appears in the display.
2
Press either side of (DISC/PRST)
repeatedly until you find the desired
station.
When no name is assigned to the selected
station, the frequency appears in the
display.
3
Press (ENTER) to tune in the desired
station.
Notes
• Once the station name or frequency has been
displayed for five seconds, the display goes back
to its normal mode.
• When you connect a TV tuner, the list-up
indication will not appear in the display of the
unit.
18
Other Functions
You can also control the unit with a rotary
commander.
Labeling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
D S P L
M O D E
S O U N D
S O U N D
M O D E
D S P L