20Pfl4122/93; Service Modes, Error Codes And Fault Finding - Philips 20PFL4122/93 Service Manual

5. Service Modes, Error Codes and Fault Finding

index of this chapter:
5.1 CSM
5.2 Factory Mode
5. 3 Repair Flow Chart
5.1 CSM
It can display CSM windows message when press 1-2 3-6 5-4 on the button (RC) remote control in normal operation mode.
The following information is displayed on screen:
CSM Item
1:Set type
2: Production code
3: SW-naming main-processor F3 20PFL4122A_V2.00
4: SW-naming extra processor N/A
5: Code 1
6: Code 2
7: Key (HDCP)
8: NVM-naming
About error code,Please refer to the table below.
Error code
0x01
0x02
0x03
0x04
0x05
5. Service Modes, Error Codes and Fault Finding
Contents Remark

20PFL4122/93

Model name
14 digit production-code to be retrieved per
BZ2A0712390037 set to be written in NVM./EEPROM
F3=family,20PFL4122=model,A=Asia,V=version,
2=SW main version,00=SW sub version
00 00 00 00 00 Logging I2C error codes in NVM/EEPROM (5 last logged errors)
00 00 00 00 00 Logging I2C error codes in NVM/EEPROM (5 first logged errors)
Information whether HDCP-key is valid
Invalid
24C32 With BDS If there are different NVM-contents per display-type
Event
Audio decoder Error
IIC bus error
Tuner error
NVRAM Error
Scaler Chip error
11
TPS 1.0A LA