Table of Contents
Advertisement
Ogo Manual
Set time: You can set the time manually or copy the network time. In most cases you will want to copy
the network time.
To set the time by copying the network time:
1. Select Set time and press Enter.
2. Select Copy network time and press Enter.
3. Select the Done button and press Enter.
To set the time manually:
1. Select Set time and press Enter.
2. Select Time.
3. Type numbers for the hour and minute.
Note:
be typed in the hour and minute fields.
4. Select the AM/PM pop-up and press Enter. Select either AM or PM and press Enter again.
After you set the time, you can toggle to select AM or PM.
Set date: You can set the date manually or copy the date from the network. In most cases you will
want to copy the network date.
To set the date by copying the network date:
1. Select Set date and press Enter.
2. Select Copy network date and press Enter.
3. Select the Done button and press Enter.
To set the date manually:
1. Select Set date and press Enter.
2. Type numbers in the Date fields (for example, 8/24/2004).
3. Select the Done button and press Enter.
Time zone: To set the time zone:
1. Select Time zone and press Enter.
2. Select the time zone you want (such as Pacific Time or Mountain Time) and press Enter.
Note:
savings time is in effect in your area, you must manually change to the next time zone (one hour
ahead) to adjust.
Network time: Network Time shows the current time on the AT&T Wireless network.
14295 Rev. 0.9 9/3/04
You do not need to use the ALT key to type numbers instead of letters; only numbers can
Ogo does not currently recognize time changes for daylight savings time. When daylight
59
Advertisement
Table of Contents
