No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission. Unitron reserves the right to change the specifications of the hardware and software described in these manuals at any time. Unitron cannot be held liable for any damages resulting from the use of this product. Specifications are subject to change without notice.
Multiswitch (Ref. 9732) v1.0 2. C ONFIGURATION OF THE MODULE Installation Mode The device starts up in installation mode to check the equipment functionality and the correct installation. In this mode the automatic gain control is frozen (commands for activating the AGC are required).
Multiswitch (Ref. 9732) v1.0 4. S AFETY NSTRUCTIONS Read these instructions carefully before connecting the unit To prevent fire, short circuit or shock hazard: Do not expose the unit to rain or moisture. Install the unit in a dry location without infiltration or condensation of water.
If during this period of warranty the product proves defective, under normal use, due to defective materials or workmanship, Unitron N.V, at its sole option, will repair or replace the product. Return the product to your local dealer for reparation...