Sony CFD-360 Operating Instructions Manual page 11

3
Press r to start recording.
(9 is depressed automatically).
Tips
• Adjusting the volume or
the audio emphasis (see
page 23) will not affect
the recording level.
• If the AM program
makes a whistling
sound after you've
pressed r in step 3,
press MODE to select
the position that most
decreases the noise.
• For the best results, use
the AC power as a
power source.
• To erase a recording,
proceed as follows:
1 Press 9 and then
press p6. Insert the
tape whose recording
you want to erase into
the tape compartment.
2 Press r.
CFD-360.E.G_3-858-521-1X.CED/CEE/CEK/EE1
Use these buttons for additional operations
POWER P
To
Stop recording
Pause recording
Turn on/off the player
p6
Press
p6
P
Press the button again to
resume recording.
POWER
Basic Operations
EN
11