L1 Service Manual
2.9.
IMEI Check
1)
Power on the handset, enter *#06#
The IMEI number must be the same with the one on the IMEI label. If not, it‟s out of guarantee.
2)
2.10.
Label Check
If one of the 2 labels not good, the cell phone will be considered as out of guarantee.
1)
IMEI Label removed, scratched, unreadable, not approved or provided by Alcatel.
2.11.
Visual Mechanical inspection
Mechanical warranties check items:
1)
Corrosion
Corrosion on the USB connectors, SIM connectors, and other metal surfaces
2)
Hole
Holes (Diameter > 1mm) on any surface, including front casing, decorate frame, battery cover,
LCD Lens, keypad.
3)
Bump
Bumps (Diameter>1mm) on any surface, including the front casing, decorate frame, battery cover,
LCD Lens, keypad
4)
Scratch (length > 3mm)
Scratches on any surface, including the front casing, furnished frame, battery cover, LCD Lens,
keypad
5)
Distortion
Bend, twisted or crushed on the h/s, cover/casing or connectors
6)
Broken
LCD broken, casing broken, cover broken
7)
Dropped.
Rev.
1.1
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
ALCATEL ONE TOUCH 7053 Level 1 Service Manual
TCT
Mobile Limited
Page
13/28