gc Aadva Lab Scan Instructions For Use Manual page 15

8. Now, you can select the type of reconstruction for which the scan is to be made.
To do this, first select the relevant position/s in the dental model and click on the corresponding number/s.
9. Once a position has been selected, define the reconstruction type from the list which appears.
Click on the Save button to proceed.
For this operational guide, a scan of tooth 47 for an anatomic crown reconstruction type will be used. For a full listing
of various scans and reconstruction type, please refer to the software documentation (http://wiki.exocad.com/).
Aadva LAB SCAN from GC
Aadva
Version 1.1 | V4901 | July 2014
®
Lab Scan
15 15