Advertisement
Quick Links
Unisolar 20.24 W
UNISUN - UNICONNECT
Unisun : high-performance solar modules
Uniconnect : fast solar connection kits
IMPORTANT
Dust and dirt on the glass face reduce power production. Clean regularly your panel,
!
using a soft cloth or a soft brush and soapy water (corrosive products banished).
Setting up Unisun modules in direct contact with the roof (without Unifix mounting
bracket) is banished.
Panel coupling: couple panels with equivalent powers (3 panels maximum).
www.uniteck.fr
EN
25/03/2013
CO00054
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Uniteck UNISUN Series
- Page 1 (corrosive products banished). Setting up Unisun modules in direct contact with the roof (without Unifix mounting bracket) is banished. Panel coupling: couple panels with equivalent powers (3 panels maximum). 25/03/2013 www.uniteck.fr CO00054...
-
Page 2: Safety Instructions
Dust and dirt on the glass face reduce power production. Clean regularly your panel, using a soft cloth or a soft brush and soapy water (corrosive products are banished). Check regularly the quality of your module connections. www.uniteck.fr 2/16... - Page 3 Connection : solar charge controller battery Connection : module solar charge controller Connection : solar charge controller electrical device To disconnect, follow the opposite order. For more details, refer to the manual of your solar charge controller. www.uniteck.fr 3/16...
-
Page 4: Compliance Statement
- an explanatory note of the failure. Caution : Our after-sales service does not accept postage due returns. After the warranty, our after-sales service ensures repairs after acceptance of a quotation. After-sales service contact : Uniteck-132 rue Pierre Simon Marquis de Laplace 34500 Béziers -France E-mail: sav@uniteck.fr... - Page 5 Under standard test conditions (STC) : sunshine - 1 000 W/m2, AM 1.5, cells temperatures (25 °C) ** Nominal operating cell temperature : sunshine - 800 W/m², With an ambient temperature of 25 °C and a wind of 1 m/s. www.uniteck.fr 5/16...
- Page 6 Under standard test conditions (STC) : sunshine - 1 000 W/m2, AM 1.5, cells temperatures (25 °C) ** Nominal operating cell temperature: sunshine - 800 W/m², With an ambient temperature of 25 °C and a wind of 1 m/s. www.uniteck.fr 6/16...
- Page 7 Battery connexion kit 2 (not provided with Uniconnect kit, optional) The roof pass is made to be sticked. To ensure sealing, use the adhesive included in the Unifix 1C kit or a sealing adhesive. Cable guides allows you to guide and fix your cables www.uniteck.fr 7/16...
- Page 8 ZOOM INTER-MODULE CONNECTION (SERIES CONNECTION) Uniconnect 1.6 NB : For the pannel connection, remove plugs placed at the end of your cables. Keep them for protecting your cables when you disconnect your modules (ex. : for your cleaning/maintenance operations). www.uniteck.fr 8/16...
- Page 9 UNICONNECT KIT : MODULE WIRING Uniconnect 2.6 nb : For the pannel connection, remove plugs placed at the end of your cables. Keep them for protecting your cables when you disconnect your modules (ex. : for your cleaning/maintenance operations) www.uniteck.fr 9/16...
- Page 10 UNICONNECT KIT : MODULE WIRING Uniconnect 3.6 nb : For the pannel connection, remove plugs placed at the end of your cables. Keep them for protecting your cables when you disconnect your modules (ex. : for your cleaning/maintenance operations) www.uniteck.fr 10/16...
- Page 11 Apply the adhesive supplied with your Unifix 1.C bracket on the white area shown (see image below). Then place it on the drilled place. - For a use on roof/wall: fix your roof pass using 2 self-strapping screws. www.uniteck.fr 11/16...
- Page 12 Pass the cables. Keep a sufficient length for your wiring. Tighten the nuts from the gland to ensure impermeability. Close the cover with 2 plastic screws. Connect the connectors together. (No risk of mistakes, the connectors are polarized). www.uniteck.fr 12/16...
- Page 13 D5 Terminal/ D8 Terminal L = 2m L = 0,3m L = 1,7m Battery kit n°1 : Add the terminals using the wing nut. If desired, you can fix the fuse kit with the provided self-tapping screw. www.uniteck.fr 13/16...
- Page 14 L= 3,2m D5 Terminal L=0,8 D5 Terminal/ D8 Terminal L = 2m L = 1,7m L = 0,3m Add terminals using the wing nut. If desired, you can fix the fuse kit using the provided self-tapping screw. www.uniteck.fr 14/16...
- Page 15 Battery kit n°1 : Link your connection kit to the battery output of your solar charge controller and then to your battery 1. Battery kit n°2 (optional) : link your connection kit to the second battery of your Unisolar 20-24D solar charge controller and then to your battery 1. www.uniteck.fr 15/16...
- Page 16 EN 60332-1 / EN 50267-1/ EN 50267-2 / EN61034 / IEC 60332-1 / IEC60754-1 / IEC 60754-2 / IEC 61034 Module connector MC4-type Battery connection Connector Battery terminals Fuse - rating 60 A - centre distance 30 mm www.uniteck.fr 16/16...
Need help?
Do you have a question about the UNISUN Series and is the answer not in the manual?
Questions and answers