Advertisement
User Manual
Introduction
Thank you for purchasing the Lindy USB 2.0 CAT.5 Extender. This product has been designed to provide
trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain it for future reference.
This LINDY USB 2.0 CAT.5 Extender 50m is composed of a transmitting and a receiving unit with 1 USB
ports which enables a USB host device to send data up to 50 metres over low cost network cable. The
receiver is powered over the network cable which means that when the included power supply is connected
to the transmitter, no power supply is required for the receiver, allowing for a discreet installation.
Package Contents
• Transmitter Unit
• Receiver Unit
• USB 2.0 A/B male cable (approximately 50cm)
• Multi-Country Power Supply, 24V 0.5A
• LINDY Manual
Features
• Supports USB 2.0 (high-speed) and USB 1.1 (full-speed, low-speed) devices
• Supports distances up to 50 meters using CAT.5 (or better) UTP/STP cables
• True plug and play without any driver installation
• Supports all major Operating Systems with USB support
• Transmitter and Receiver units both feature integrated mounting brackets
Specification
• Transmitter: Input Ports: 1 x USB 2.0 B, DC Socket for PSU (3.5/1.35mm) Output Port: 1 x RJ45
• Receiver: Input Port: 1 x RJ45, Output Port: 1 x USB 2.0 A
• Dimensions: 6 x 6.7 x 2.3cm (each unit)
• Weight: 91g (each unit)
• Temperature Range: 0°-40°C (operating), -10°-70°C (storage)
• Humidity: max. 80% (operating), max. 95% (storage)
Installation
1.
Connect the transmitter to an available USB port on the host computer by using the included USB
cable.
2.
Connect the power adapter to the transmitter unit.
3.
Place the receiver unit near the USB device in the desired remote location.
4.
Connect the transmitter to the receiver unit by using a CAT.5 (or better) cable (not included!).
English
Advertisement
