Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Amiko Smart Home
- Page 1 Smart Home User Manuals www.amikohome.com...
- Page 2 Picture is illustration...
-
Page 3: Installation
- U s e r M a n u a l Introduction Operation 1. The product configures with AMIKO smart Thank you for choosing AMIKO HOME smart door sensor. AMIKO Smart Door Sensor uses ZigBee gateway HUB; technology with low power consumption, low data 2. -
Page 4: Operation
Then push the OK button to allow the device joining the network, the led Thank you for choosing AMIKO HOME Smart flashes red, blue and finally green when the Home HUB. Smart HUB is easy to install. The internet connection is set. - Page 5 ZigBee protocol that enables the PIR 2. Put the battery (CR 123A) into the motion (infrared) sensor to send alert to AMIKO HOME mobile sensor, put back the plastic cover and long application, when noticing movement in the covered area.
- Page 6 When the ZigBee protocol that enables this plug to pairing is done, AMIKO Smart Plug will connect to the smart home network via AMIKO automatically appear in AMIKO HOME Smart HUB. Users can use their mobile devices application Device Manager as a new device.
- Page 7 HOME mobile application. The Smart Bulb 5. Set back to factory mode: power on and off connects to the smart home network via AMIKO Smart HUB. Users can control their lights with five times in a row while it is powered on with their mobile devices via the mobile application.
- Page 8 - U s e r M a n u a l Introduction Operation 1. Device must be paired with AMIKO Smart Thank you for purchasing AMIKO HOME Smart Switch. HUB. Our smart switch is available in 1, 2 or 3...
- Page 9 ZigBee protocol that enables and humidity sensor, put back the plastic cover the sensor to send data to AMIKO HOME mobile and long press the reset button. As soon as the application when the environment temperature and light on the device starts blinking press OK humidity level (%) is measured.
- Page 10 OK button on HUB to join the leaking. The Smart Water Leakage Sensor connects to network. the smart home network via AMIKO Smart HUB and sends alert on water leakage to the users’ mobile 3. Within 1 minute your water leakage sensor devices via AMIKO HOME mobile application.
- Page 11 ZigBee protocol and it is designed to control This is for reset/pairing. curtain/shader motors. The controller should be paired with AMIKO Smart HUB so that the controller could 3. Please push the small black button for 3-5 connect to the ZigBee wireless network. After pairing secs.
-
Page 12: Warranty
Warranty The products are under warranty for one year, except damage by improper use. The following situations are beyond the scope of free warranty. a. Taken apart and maintained by unauthorized maintenance center. b. Damage by flood, fire, thunder and other natural disasters.
Need help?
Do you have a question about the Smart Home and is the answer not in the manual?
Questions and answers