Oxygenics PowerMax Easy Installation Instructions

P
ower

EASY INSTALLATION

INSTRUCTIONS

STEP 1

STEP 2

Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape
turn the existing and flush out
shower head in a shower pipe for
counterclockwise 5 to 10 seconds.
direction.

STEP 4

STEP 5

In a clockwise Attach hex nut
direction, screw end of hose to
handheld holder holder and hand
onto the taped tighten.
portion of shower
arm. Hand
tighten only.
EASY TWIST SPRAY
SELECTION
Enjoying multiple spray
patterns during your
shower has never
been easier. With the
PowerMax's easy twist
design, simply rotate the
easy spray selector for a
quick spray change.

USING THE COMFORT CONTROL

Located on the back of the shower head, the comfort control
regulator eliminates sudden blasts of water. Note: The comfort control
is not a shut off valve. When turned to the lowest position, the shower
head continues to flow. This is a normal safety feature. Unit may be in
lowest flow position during shipping. Check the position of comfort control upon installation.
M
ax

STEP 3

Wrap plumber's
tape clockwise
3 or 4 turns
around threaded
end of shower
arm.

STEP 6

Attach conical
nut end of hose to
handheld shower
and tighten. Insert
your new handheld
shower in holder.
ATTENTION:
WASHERS
PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted
into both hose ends for
proper installation.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.866.440.9257
1.775.420.5600
or
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday-Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.50 GPM
(5.68 L/min) or less.