1. Manuals
  2. Brands
  3. Fervi Manuals
  4. Rivet Tools
  5. 0469
  6. Operation and maintenance manual

Fervi 0469 Operation And Maintenance Manual

Riveter for threaded inserts
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND
MAINTENANCE MANUAL
Riveter for threaded inserts
Art. 0469
ORIGINAL INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0469 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fervi 0469

  • Page 1 OPERATION AND MAINTENANCE MANUAL Riveter for threaded inserts Art. 0469 ORIGINAL INSTRUCTIONS...
  • Page 2 Manual on the date of issue, listed on this page; however, the trolley may be subject to potentially major technical changes in the future, without the Manual being updated. Therefore, see FERVI for information about modifications that could be implemented. REV. 1 November 2013...

  • Page 3: Table Of Contents

    HARDWARE CONTENTS INTRODUCTION ..................4 Preface..........................5 SAFETY WARNINGS .................. 6 General safety regulations ....................6 Risks Associated with the Work Area ................7 Risks associated with the ejection of parts of the rivet ..........7 Technical support......................7 DESCRIPTION OF THE TOOL AND INTENDED USE ........8 Technical specifications ....................9 Improper use and contraindications ................9 SUBSTITUTING THE ROD ................

  • Page 4: Introduction

    The purpose of this manual is to provide the knowledge necessary for the use and maintenance of the Riveter Art. 0469 and create a sense of responsibility and an understanding of the capabilities and limitations of the means entrusted to the operator.

  • Page 5: Preface

    HARDWARE Residual Risks This highlights the presence of dangers that cause residual risks to which the operator must pay attention in order to avoid injury or damage to property. 1.1 Preface For safe and easy operation of the Riveter, this manual must be read carefully in order to acquire the necessary knowledge.

  • Page 6: Safety Warnings

    HARDWARE 2 SAFETY WARNINGS 2.1 General safety regulations Risks associated with using the riveter DO NOT underestimate the risks associated with the use of the riveter. Concentrate on the work that is taking place. Risks associated with using the riveter Each and every person who is responsible for the use and maintenance of the device should first have read the instruction manual, particularly the chapter dealing with safety.

  • Page 7: Risks Associated With The Work Area

    HARDWARE 2.2 Risks Associated with the Work Area 1. Keep the workplace tidy and free from hindrances; disorder causes accidents. 2. Make sure that the work environment is forbidden to children, non-employees and animals. 3. Do not use the riveter in areas with a risk of fire and/or explosion. 4.

  • Page 8: Description Of The Tool And Intended Use

    HARDWARE 3 DESCRIPTION OF THE TOOL AND INTENDED USE The Riveter is a tool created for the implementation of threaded rivets to permanently connect two or more pieces of sheet metal. The inner part of the rivets used by this tool is threaded, it therefore possible to use the threaded hole for the connection of additional sheets or mechanical parts via the use of a screw.

  • Page 9: Technical Specifications

    HARDWARE 3.1 Technical specifications Riveter for threaded inserts 0469 Weight: 500 g Length: 200 mm Maximum compression: 7 mm Maximum effective compression: 5-6 mm Dimensions of threaded rivets: M3, M4, M5, M6 3.2 Improper use and contraindications IT IS STRICTLY FORBIDDEN TO !! ...

  • Page 10: Substituting The Rod

    HARDWARE 4 SUBSTITUTING THE ROD Before it is possible to use the tool it is necessary to install the appropriate threaded rod according to the type of rivets to be mounted. The riveter can mount threaded rods M3, M4, M5, M6. 1.

  • Page 11: Using The Riveting Tool

    HARDWARE 5 USING THE RIVETING TOOL 1. Mount and screw the rivet onto the rod of the riveter. Screw the rivet most of the length of the threaded part of the rod. However, do not screw the rivet until it touches the guide nut because it will make the operation of the riveting tool impossible Figure 6 –...
  • Page 12 HARDWARE 3. Press the handles together to insert the rivet into the hole. Briefly apply firm pressure on the handles. Use the rear knob of the riveting tool to further tighten the rod of the rivet for 2-3 full threads at a time and then proceed to re-press the handles together. Repeat the procedure until the rivet is perfectly fixed.

  • Page 13: Maintenance And Cleaning

    HARDWARE 6 MAINTENANCE AND CLEANING The purpose of this section is to provide all the information on the maintenance procedures and frequency that the Riveter requires Art. 0469. Frequency INTERVENTION Monthly Daily Weekly 1. General visual inspection 2. General cleaning 3.

Table of Contents