Identiclass On Your Computer; System Requirements; Installing Drivers - HID identiCLASS 3300 Quick Start Manual

identiCLASS Quick Start Guide 3134-901, A.5
3700 Enhanced Reader Board
Connect the 3700 Enhanced Reader Board to the ID1 Enhanced Antenna. Then, connect
the Smart Card Adaptor to the 3700 Enhanced Reader Board.
Smart Card Adapter
(SIM Size)

identiCLASS on your Computer

System Requirements

Computer/Processor
Operating System
Memory
Hard Disk
Internet Browser

Installing Drivers

1
Insert the USB Flash Drive and installation starts automatically. The drivers are
installed on your computer. If the installation does not start automatically, open
My Computer, navigate to the USB Flash Drive identiCLASS DTK and click
start.bat.
2
Connect the reader board to your computer using the provided USB cable.
3
Once the drivers are installed, verify the reader is operational using the
identiCLASS Software Configuration Tool.
Page 4
3700 Enhanced
USB
1 GHz 32-bit (x86) or 64-bit (x64)
USB Port
Windows XP SP3 plus .NET Framework 3.5 SP1.
Note: The identiCLASS DTK installs the .NET
framework if not available.
1 GB
1 GB
Mozilla Firefox
Microsoft Internet Explorer
© 2010, 2011 HID Global Corporation. All rights reserved.
Reader
Coaxial
Board
Cable
1 m (3.28 ft)
ID1 Enhanced Antenna
July 2011