Table of Contents
Advertisement
Available languages
Available languages
Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
a DSO button 2
To select the DSO mode (1, 2, 3 or OFF).
The larger the number, the more enhanced
the effect.
b SOURCE button
To power on/change the source (Radio/CD/
MD*
1
).
c Volume control dial/Select button 4,
9, 10
To adjust volume (rotate); select items
(press).
d GP*
/PRESET +/– buttons
2
To select preset stations/skip groups (press);
skip groups continuously (press and hold).
e Receptor for the card remote
commander
f LIST button 9, 11
To list up.
g Display window
h OPEN button 5
To open the front panel.
i EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
j MODE button 8, 11
To select the radio band (FM/AM)/select the
unit*
3
.
k SEEK –/+ buttons
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
l DSPL (display) button 4, 8, 10
To change display items.
m SENS button
To improve weak reception: LOCAL/
MONO.
n BTM button 8
To start the BTM function (press and hold).
o Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD/MD*
1
:
(3): REP 8
(4): SHUF 8
(5): BBE MP*
2
4
To activate the BBE MP function, to set
"BBEMP-ON" during playback on this unit.
To cancel, set "BBEMP-OFF."
p OFF button
To power off/stop the source.
q RESET button 4
r Z (eject) button 5
To eject the disc.
s Disc slot 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
t < (.)/, (>) buttons
To control radio/CD, the same as (SEEK)
–/+ on the unit. (For details of other
operations, see "With the card remote
commander" on each pages.)
u VOL (volume) +/– button
To adjust volume.
v ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
w SEL (select) button
The same as the select button on the unit.
x M (+)/m (–) buttons
To control radio/CD, the same as
(GP/PRESET) +/– on the unit. (For details
of other operations, see "With the card
remote commander" on each pages.)
y SCRL (scroll) button 8
To scroll the display item.
z Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 When an MD changer is connected.
*2 When an MP3/ATRAC CD is played and a changer
is not connected. If the changer is connected, the
operation is different, see page 11.
*3 When a CD/MD changer is connected.
*4 The unit only.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 14.
7
Advertisement
Table of Contents
