Charging; Inserting A Memory Card - Captiva PAD 8 GPS Manual

4 Charging

Plug the DC end of power adapter to the USB port of the
device and plug the AC end to the wall socket for charging.
Please only use a 5V / 2.0A adapter included in the gift box.
Normally it takes approximately 5 hours to fully charge the
device. Operating the device during charging with the AC
adapter may extend the time of full charging.
Note:
In order the WiFi work fine, the battery should be charged for
a minimum of 20%.

5 Inserting a Memory Card

The device supports micro SD/SDHC cards.
To insert a micro SD card, place the card connector towards
the front side of the device and the printing side of the card
towards the rear side of the device.
To remove the micro SD card, gently press the edge of the
card to release the safety lock and pull the card out of the slot.
Notice
Don't remove the micro SD card while viewing the file inside or
the device could fail to operate correctly.
6