Related Manuals for Dinsafer DKPD01A
Summary of Contents for Dinsafer DKPD01A
- Page 1 The User Manual of Wireless RFID Keypad Please read this manual carefully before use. Please keep it properly for further reference.
-
Page 3: Table Of Contents
Table of Contents Introduction Foreword Parts List Appearance Preparation before Use Power ON Pair the Keypad with the Main Box Pair the RFID Tag with the Main Box Usage Activate Panel Arm/Disarm/Home Arm Care & Maintenance Usage Notices Maintenance Technical Specifications Technical Specifications... -
Page 4: Introduction
Introduction Foreword Thank you for purchasing this wireless keypad. It is recommended to install closed to the entry door inside, so users can achieve operations such as arm, disarm, home arm after inputting passcode or by scanning the RFID tags. This keypad is recommended to use with the Entry Delay feature of the smart alarm system, to avoid triggering alarm before disarming from keypad after entering the house. -
Page 5: Appearance
Appearance Status Bar (LED Indicator) DISARM HOME ARM RFID Area Battery Cover Power Switch Reset Hole Battery Tamper Switch DC-IN... -
Page 6: Preparation Before Use
Preparation before Use Power ON 1. Make sure the battery has been installed correctly. 2. If you are using it for the first time, please connect the keypad to the power adapter. 3. Turn on the power switch under the battery cover. -
Page 7: Pair The Keypad With The Main Box
Pairing the Keypad with the Main Box Scan QR Code Learn Mode 1. Reset the keypad until the status bar is flashing in 3 colors. Please keep the keypad powered on and lighted up during the whole pairing process. 2. Launch the App (For networking alarm system) 2. -
Page 8: Usage
Usage Activate Panel 1. When the keypad is in sleep mode, touching any button of the keypad could activate the keypad. 2. After being activated, the keypad would synchronize the real-time status with the alarm system immediately, the result would be represented by the status bar. 3. -
Page 9: Care & Maintenance
Care & Maintenance Usage Notices •The keypad should be connected to control panel before use. •The power supply of keypad will probably impact on the transmitting distance of wireless signal. •The keypad is compatible for most of our alarm system, contact the distributer for more detail. •Please make sure the battery has been inserted into the keypad before use. -
Page 10: Faq
Problem Cause Solution Please connect the power adapter to charge the battery.If the problem Low Battery is no solved, please contact the No response distributer for more help. from keypad Take off the glove and try pressing Wearing Gloves the keypad again. Make sure the alarm system is power ON and the App or PC client has already connected to the system. -
Page 11: Technical Specifications
Technical Specifications System Preference Working Humidity ≤90% Working Temperature -10℃~ 50 ℃ Power IN DC Jack. 5V2A Battery Lithium-ion Battery, 890mAH Wireless Frequency 433.92MHz Wireless Range 200m without obstacle Standby Time 6 months for daily use(8 times a day, Every times 30 seconds) Weight 162g with backup battery Size... - Page 12 PA: UM-DWRK/EN-2016V1.0...
Need help?
Do you have a question about the DKPD01A and is the answer not in the manual?
Questions and answers