Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for SKF ST Series
Summary of Contents for SKF ST Series
- Page 1 Installation, operation and maintenance manual Foot switch Read this manual before installing, operating or maintaining this actuator. Failure to follow safety precautions and instructions could cause actuator failure and result in serious injury, death or property damage.
-
Page 2: Table Of Contents
7 Fault locating and clearance ........6 Compliance with standards EN 60601-1 EN 60335-1 UL 2601-1 SKF Actuations System (Liestal) AG Oristalstrasse 97 CH-4410 Liestal, Switzerland Phone +41/ 61/ 925 41 11... -
Page 3: General
Technical Instructions Comfodesk Foot Switch STF/STH/STG General 1.1 Using these technical instructions The technical instructions are intended for design engineers who are using this Magnetic product in their applications, and for installation engineers who are working with the product. The technical instructions contain all relevant information about this Magnetic product, and are subject to alteration in the interests of technological progress. -
Page 4: Installation And Commissioning
Technical Instructions Comfodesk Foot Switch STF/STH/STG Installation and commissioning 3.1 Components supplied The foot switch comprises 1 to 5 pushbutton pairs, with connected cable set. Options Expanding threaded inserts (ZBE-521122) Rubber stops (ZBE-135310) 3.2 Installation Free-standing installation with rubber stops The foot switch can be positioned on any level surface using the 4 rubber stops (see options). -
Page 5: Operation
Technical Instructions Comfodesk Foot Switch STF/STH/STG Operation 4.1 Operation without memory function Fig. 4 – Operation without memory function The drive is controlled directly using the direction keys Drive is disengaged. Drive is engaged. 4.2 Operation with memory function Initialisation run The initialisation run is compulsory, Move the drive (drives) using the keys on the foot switch in counter-load... -
Page 6: Servicing And Maintenance
Technical Instructions Comfodesk Foot Switch STF/STH/STG Saving memory positions 1. Use the keys to move all the drives into the position you want to save on key (Hold down the relevant keys until the required position has been reached.) 2. Press the key followed by (or simultaneously) key There should be a gap of no longer than 0.5 seconds between pressing the two keys. -
Page 7: Technical Data
Technical Instructions Comfodesk Foot Switch STF/STH/STG The product is not subject to identification regulations conforming to CE or EMC guidelines. The necessary EMC measures must be taken for the end product by the manufacturer of the end product, in accordance with the installation conditions, wiring and control system, and checked for the intended use.
Need help?
Do you have a question about the ST Series and is the answer not in the manual?
Questions and answers