Related Manuals for BREWISTA Cold Pro Nitro 2
Summary of Contents for BREWISTA Cold Pro Nitro 2
-
Page 1: Cover/Customer Service Information
V2PX-H Customer Service (North America): 1-888-538-8683 Local (Wyoming, USA): 307-222-6086 Email: help@mybrewista.com READ THIS MANUAL PRIOR TO FIRST USE AND SAVE FOR FUTURE REFERENCE 1-year Limited Warranty... -
Page 2: Important Safeguards
• Never allow water to come into contact with any of the electrical parts of the Cold Pro Nitro 2™ machine: There is a danger of creating a short circuit. • Children should be supervised to ensure that they do not play with the appliance. -
Page 3: Additional Safeguards
ADDITIONAL SAFEGUARDS DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE OR IF APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY. EXTENSION CORDS A short power-supply cord is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. Longer detachable power- supply cords or extension cords are available and may be used if care is exercised in their use. -
Page 4: Table Of Contents
Table of Contents Cover/Customer Service Information IMPORTANT SAFEGUARDS ADDITIONAL SAFEGUARDS Cold Pro Nitro 2™ Components Intended Usage Operation Instructions • Assemble your Cold Pro Nitro 2™ • Connect your Cold Brew Container • Dispensing your Nitro Cold Brew • Adjustable Settings ◦... -
Page 5: Cold Pro Nitro 2™ Components
Cold Pro Nitro 2™ Components Tap Handle 10. Control Panel Cover (protects Tap Valve Body Temperature Control and Gas Tap-outlet Spout Level Control) Machine Casing 11. Intake Line (2.0 m) with Coupler Cold Brew Inlet to connect to dispenser Power Button 12. -
Page 6: Intended Usage
Plug in the power cord (8) to a grounded outlet (refer to Additional Safeguards, page 3). Connect the intake tube (11) to the Cold Pro Nitro 2™ by pushing the male elbow coupler (12) into the female coupler at the bottom of the machine located at the far end of the machine on the bottom. -
Page 7: Dispensing Your Nitro Cold Brew
Turn the screw at the far side of the BiB Adaptor so that it pierces the nozzle and is securely in place. • Connect the BiB adaptor to the Cold Brew Inlet (5) of your Cold Pro Nitro 2™ using the short length of tubing attached to it. ◦... -
Page 8: Higher Cooling Power For High Volume Dispensing
Ensure that your coffee was filtered to a fineness of at least 50 μm (microns). Filtration of 100 μm or more is ideal for use with the Cold Pro Nitro 2™. Coarser filtration sizes lead to clogging of the filter in the intake line (11) or of the tap- outlet spout (3). -
Page 9: Cleaning Instructions
Brewista recommends Cold Pro™ Cleaner for cleaning your Cold Pro Nitro 2™ System. The Cold Pro Nitro 2™ needs to be cleaned every 24 hours as described in the steps below. If it has not been used for a long period of time we recommend cleaning it per the instructions below. -
Page 10: Maintenance
Never attempt to operate the Cold Pro Nitro 2™ if it is faulty. Please report any fault in the Cold Pro Nitro 2™ to your service provider. Only qualified service providers may carry out servicing operations and repairs on the Cold Pro Nitro 2™. -
Page 11: Troubleshooting
Troubleshooting your Cold Pro Nitro 2™ System Problem Cause Solution Not enough or too much The gas needle valve is not Follow instructions in the foam set up properly. “Adjusting the Gas Level” section on page 7. The needle valve has a default setup of 1. - Page 12 68°F (20°C) or cooler. Do not use frozen or nearly freezing liquids with your Cold Pro Nitro 2™. The dispenser does not Filter adapter (13) in the Check to see if the filter dispense coffee intake line is clogged.
- Page 13 Problem Cause Solution The dispenser does If the dispenser was used In such a situation, the not dispense coffee without a filter adapter dispenser and the pump (Continued) (13) in the intake line (11), must be flushed with tap sediment can get into the water.
-
Page 14: 1-Year Limited Warranty Information
LIMITED WARRANTY 1-Year Limited Warranty from the date of original purchase. 1. This warranty extends only to the original consumer, purchaser, or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. The product must be purchased at an authorized retailer for the warranty to be valid. -
Page 15: Warnings And Technical Data
WARNING: Never leave the unit unattended while appliance is running, especially if there are children nearby. WARNING: Do not immerse the unit in water or any other liquid. This may cause electric shock or damage the appliance. TECHNICAL DATA For countries with voltage For countries with voltage ranging from 110-127V ranging from 220-240V... - Page 16 V2PX-H 1133 W. 27th Street, Cheyenne, WY 82001, USA | www.mybrewista.com Toll Free in North America: 888-538-8683 | Local: 307-222-6086...