Cobra RAD350 Operating Instructions Manual page 8

Your Detector
Dashboard Mounting
4 English
Installation
1. Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road and is
parallel to the road's surface. The angle CANNOT be
adjusted after mounting
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener. You
can remove and
reattach the unit as often
as you like.
5. Plug the power cord into the
detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.