Page 1
ASSEMBLY INSTRUCTIONS BRANDO DOUBLE BED IMPORTANT: Please read these instruction carefully before IMPORTANT: Please read these instruction carefully before attempting to assemble or use this item attempting to assemble or use this item Please keep these instruction safe for future reference.
Page 2
HARDWARE M6 x 45mm M8 x 40mm M6 FLAT WASHER M3.5 x 16mm M4 x 45mm (6 pcs) (8 pcs) (6 pcs) (8 pcs) (10 pcs) M8 x 30 WOOD DOWEL M4 ALLEN KEY M5 ALLEN KEY (12 pcs) (24 pcs) (4 pcs) (1 pc) (1 pc)
Page 3
Note : Follow the line drawing to assemble the bed leg. Note : Follow the line drawing to assemble the bed leg.
Page 4
Loosely fit bolt (B) into Headboard (1) & Footboard (2) as picture shown.
Page 5
5.1 Fit wood dowels (F) into headboard wing (4). 5.2 Assemble headboard wing (4) to headboard (1) using the JCBC Bolts M6 x 45mm (A) and M6 flat washer (C) using M4 allen key (I) .
Page 8
Safety Advice Please take the time to carefully read through the whole of these instructions before you commence and follow the instructions in the order set out. Keep these instructions for future reference. Unpack, inspect and check off all of the contents. Please dispose of packaging carefully and safely.