Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Neat D-TECT IP
Summary of Contents for Neat D-TECT IP
- Page 1 D-TECT IP Radio interface for Ethernet User Manual NE41 15012-02 v1.0...
- Page 2 Information in this user manual is subject to change without notice. When the device is used it complies to essential NEAT Electronics AB reserves the right to change requirements and relevant provisions. or improve their products and to make changes...
-
Page 3: Table Of Contents
Contents General D-TECT IP is an Ethernet based radio General interface inteded to be used together Hardware overview with D-SERVER from NEAT Electronics. Installation The unit can be powered directly from Configuration a PoE switch or from an AC adapter, LEDs art. -
Page 4: Installation
D-SERVER or another low the celing and letting the cables problem, e.g. no IP-address in the go upwards to the ceiling. unit. D-TECT IP User Manual NE41 15012-02 v1.0... -
Page 5: ResetButton
The DC cable pins has meaning power socket before cleaning. • After cleaning, control that the product works according to below. properly by sending a test alarm to the alarm receiver/central. Connection Ground D-TECT IP User Manual NE41 15012-02 v1.0... -
Page 6: Safety Notes
• The product may be placed near other products or devices as long as mechanical vibration is not present. • Remove batteries if the unit is to be out of use or stored for an extended period of time. D-TECT IP User Manual NE41 15012-02 v1.0... -
Page 7: Technical Data
Technical data Ethernet 10/100 Mbit/s Power over Ethernet Class 2 (3.84 - 6.49W) Mode A & B Power supply 7.5V , 0.45A Power comsumption Max 3.3W Measures (W x H x D) 110 x 113 x 32 mm Weight 120 g Temp. - Page 8 www.neat-group.com/se/en...
Need help?
Do you have a question about the D-TECT IP and is the answer not in the manual?
Questions and answers