Redkite Sleeptight Instruction Leaflet page 3

To fold
6. Remove the mattress. Pull the centre hub up to a
raised position. Approx to half way or more.
Fig 6.
7. Lift the folding rails in the centre marked by the
arrows. Squeeze the button underneath the rail
(folding joint), keep the button pressed in and drop
the rails down.
If you are experiencing difficulty with getting the folding
rails to unlock, make sure the centre hub has been
pulled all the way up and that you have lifted the folding
rail before squeezing the button.
Fig 7.
8. Pull the centre hub completely up and draw in the four
corners of the travel cot and tuck in any loose fabric.
Fig 8.
To store
9. Wrap the mattress around the travel cot and secure
with the Velcro straps. Store in the carry bag.
Handy hints
For added safety this product features two safety
devices that prevent inadvertent release of the
folding mechanism. Please see the following
helpful tips to ensure correct operation of the
safety functions on this model.
Centre hub
Once the centre hub has been pushed fully down it
is not possible to assemble / release the top
folding rails.
When assembling the travel cot, the top folding
rails must be fully engaged before pushing the
centre hub down.
When folding the travel cot, the centre hub must be
raised to allow the top folding rails to be folded.
Top rails
The top folding rail consists of three parts. There
are two rods held either side of a central folding
mechanism. Both sides of the central lock need to
be released individually to enable the top rail to
fold.
Pull centre hub up
Fig 6.
Fig 7.
Central folding mechanism
(button underneath rail)
Folding rails
Fig 8.
Draw corners in
Fig 9.
Wrap mattress around