Mitsubishi Electric MUZ-GL09NA Service Manual page 69

11-2. MUZ-GL18NA MUZ-GL18NAH MUY-GL18NA
OPERATING PROCEDURE
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the screws fixing the conduit cover.
(6) Remove the conduit cover.
(7) Remove the screw of fixing the conduit plate.
(8) Remove the conduit plate.
(9) Remove the top panel.
(10) Remove the valve cover.
(11) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(12) Remove the screws of the cabinet.
(13) Remove the cabinet.
(14) Remove the screws of the back panel.
(15) Remove the back panel.
Photo 3
Screws of the conduit cover
Photo 4
Screw of the conduit plate
OBH733G
NOTE: Turn OFF the power supply before disassembly.
PHOTOS/FIGURES
Photo 1
Screws of the top panel
Screws
of the
cabinet
Screws of the cabinet
Photo 2
Screw of the back panel
Screws of the top panel
Screw of
the valve
cover
Screws of
the cabinet
Screws of the service panel
69
Screws of the cabinet
Screws of
the cabinet
Screws of
the back
panel