Use UglyBox as Receiver: • Select the WDMX menu and setup the UglyBox as receiver Link the UglyBox from the desired transmitter as you do with any W-DMX Receiver. There are 4 ways to track the radio reception: • In all menus, the momentary reception is displayed in the title bar •...
LED Indication - Transmitter: On 900ms / Off 100ms = no DMX present Continuously On = DMX present On 100ms / Off 100ms = linking receivers On 500ms / Off 500ms = unlinking all receivers W-DMX UglyBox MKII User Manual, edition 1...
Settings | Power | pin code screen. Default pincode is 1234 Turn off the unit 3. Linking/unlinking operation 3.1 Linking receivers When the UglyBox is operating as transmitter, you need to link the receivers to be able to investigate the link conditions. W-DMX UglyBox MKII User Manual, edition 1...
“UNLINK” button on the main menu (see Menu A, item 17). On W-DMX RX units, if the LINK led is not off, the unit is linked, press and hold the red function switch for 5s until the LINK led turn off.
Add an extra point in the log, if automatic, that will be added between the automatic points Create a new file, the file name has the format YYYYMMDD-HHMM.txt at the time of creation W-DMX UglyBox MKII User Manual, edition 1...
Numbers to indicate or set DMX level Start address, press to enter a number Decrease start address Increase start address Enter option menu for timing and to set all DMX channels (See ”Menu F2”) W-DMX UglyBox MKII User Manual, edition 1...
10. Menu G: “DMX In” Graphical representation of DMX value Decimal representation of DMX value (0 – 255) Start address of view, press to set Decrease start address Increase start address View timing information W-DMX UglyBox MKII User Manual, edition 1...
Displays the timing values read on the output Return to DMX In screen 12. Menu H: “RBG Fixture” The display acts as an RGB fixture Start address, press to change Decrease start address Increase start address W-DMX UglyBox MKII User Manual, edition 1...
14. Menu I 2: Display basic information about software version. If connected to a PC, select “Update” to upload new firmware file from a PC computer, not running Windows 8 or later. Software date and revision W-DMX UglyBox MKII User Manual, edition 1...
Set the timeout for backlight when running from USB power, a keypad is displayed to set the time in minutes Turn off the timeout for backlight when running from USB power Select the backlight intensity W-DMX UglyBox MKII User Manual, edition 1...
No (radio card support, but no UglyBox support) Ethernet No Loss of data behavior As wire Output protocols DMX512 Ethernet Radio technologies W-DMX 2.4 GHz 5.8 GHz Adaptive Frequency Hopping W-DMX G3 compatibility License free W-DMX Datasafe Redundancy W-DMX UglyBox MKII User Manual, edition 1...
Page 14
ARE YOU WIRELESS? Head office: Stureparksvägen 7 451 55 Uddevalla Sweden Mail: sales@wirelessdmx.com Phone: +46 522 511 511 Web: wirelessdmx.com...