Dc Usb Outlets; Troubleshooting/Faq - 4Patriots Patriot Power Generator 1800 User Manual

DC USB OUTLETS

• To use your USB outlets, first plug
the device you want to use into one
of the available outlets. Then, turn
the power switch to the ON position.
A green LED indicator will light up to
confirm the power is on.

TROUBLESHOOTING/FAQ

1. My Patriot Power Generator won't turn on.
• Please make sure the main power button is turned on. The button
should remain depressed and illuminate with a blue light when the
unit is on.
• Make sure the main AC power switch, found to the right of the LCD
display, has been switched to the ON position. When the green LED is
lit, your Patriot Power Generator AC outlets are on and ready for use.
• For the Patriot Power Generator to function at its highest ability, it
must be charged after being used and must not be abused, misused
or damaged. Please ensure all of these conditions are met.
• Should you encounter further trouble please contact our customer
service department (see Contact Information on page 2).
2. I used the Patriot Power Generator once, and now it
won't charge when I plug it into the wall.
• The Patriot Power Generator is designed to work for over 2,500 full
discharge and charge cycles. If it will not charge, follow these steps:
- Please make sure the main power button is turned on. The
button should remain depressed and illuminate with a blue light
when the unit is on.
- Disconnect the power cable from the unit and wall outlet.
- Inspect the cable for damage to both ends and the cable itself.
- Inspect the Patriot Power Generator and the wall outlet for
damaged sockets or disfigurement.
17