Related Manuals for Nightowl Stage Lighting RGB 3 IN 1 LED
Summary of Contents for Nightowl Stage Lighting RGB 3 IN 1 LED
- Page 1 USER MANUAL LED Matrix 25X30W COB BLINDER RGB 3 IN 1 LED KEEP THIS MANUAL FOR FUTURE NEEDS...
- Page 2 1. Before you operating 1.1 Packing list Product name quantity LED Matrix Light 1 pcs Power cable 1pcs User manual 1pcs 1.2 Un packin g ins tr uction s When you get this product, please take it from carton carefully to make sure whether all the accessories are in and damaged or not When you find that there are any parts or wrong sign with the carton, or non-operation, please inform us and to keep the carton and shipping bill completely.
-
Page 3: Fixture Linking
The light could not be water-proof, it only allow to be used in door. Don’t expand the light in wet or rain day, to avoid fire or damaged light. Please confirm there is no flammable material around the light. The light must be set up the ventilating place. The distance is≥51cm around approach material. To check the air passage is OK at any time. -
Page 4: Setting Up A Dmx Signal Connect
2.3 Setting up a DMX signal connect As following pictures show, please connect the first light to the signal cable which is with XLR by DMX controller, then, connect light in series. The light must be set up the ventilating place. To confirm there is nothing to hinder the heat dissipation place. When the light is hanged, please choose a safety wire. -
Page 5: Menu Function
3. Operating instructions 3.1 Menu configurations Access control panel functions using the four panel buttons located directly under near the the LCD Display. LCD display board MENU ENTER DOWN Button Function Used to access the menu or return to a previous menu MENU option. - Page 6 3.3 Us er configu ration s Set-up 1pcs light`s menu mode (Auto-running) .Press the MENU, such as the picture 4.2 shows the menu function .Use the UP/DOWN buttons to choose the right one to confirm. Set-up Master-slave mode Press the MENU, same as picture 4.2 shows the menu function Master: Set any one of lights to auto、sound or strobe control mode Slave: Set them to DMX mode and their address code to1.
- Page 7 80 channe ls Dimmer R、G、B Dimmer, Linear Dimmer, Dark to Bright R、G、B Strobe, Slow to Fast Strobe 1— 20 DMX 80Channel Controlling; 21—70: Color jumping to Functions change; 71—120: Color gradually change; 121—170:color slowly change 171—220: dot running 221—240: Sound activation 1;...
-
Page 8: Keeping The Projector Clean
4. KEEPING THE PROJECTOR CLEAN It denitely necessary to keep a projector clean for its reliable use. Cooling fans and their shield should be cleaned every 15days. LED lamps’ lens and cover should be cleaned regularly for optimized light output. Cleaning frequency depends on how often a projector is used and its operational environment. - Page 9 5. Warrantee One (1) Year Limited Warranty Subject to the limitations set forth below, Nightowl Stage Lighting hereby represents and warrants that the components of this product shall be free from defects in workmanship and materials, including implied warranties of merchangeability or fitness for a particular purpose, subject to normal use and service, for one (1) year the original owner from the date of purchase.