Advertisement
Quick Links
Advertisement
Summary of Contents for Base SWM290
- Page 1 SWM290 IP Camera User Manual IMPORTER: SUOMEN TURVAKAUPPA OY www.turvakauppa.com...
- Page 2 Please check the latest version from our website www.safewith.me Different from other equipment in BASE smart home ecosystem. The camera connects with Wi-Fi directly, it doesn't need SWM188A gateway. You have two choices for the IP Camera. • GS290-130：1.3 million pixels, 1280×960 resolution •...
- Page 3 SWM290 User Manual V2.1 4 Installation instruction 3) Power on 1) Install the buckle 2) Install the Choose a clean and camera Connect power line. smooth wall. Drill two The device will connect Install the camera holes. Put the plastic Wi-Fi automatically if it to mounting base.
- Page 4 Note: Your phone needs to be connected in Wi-Fi before the camera connects to Wi-Fi and you need to enter the password. 5.1 Download and install APP • Search ‘BASE smart home’ and install from Google Play or Apple Store. 5.2 Add camera Use the power line to connect 2) Click section ”Add A New...
- Page 5 SWM290 User Manual V2.1 3) Click to Add a new IPC 4)Make sure your camera's led flashes quickly, if not, please follow the text to operate. 5)Enter a Wi-Fi password and 6)Wait a few seconds, if the connection click ”SET WIFI”...
- Page 6 SWM290 User Manual V2.1 5.3 Recorded Videos Play The camera supports and plays recorded videos. Please notify that recorded videos are stored in the TF card plugged into camera. The maxium video amount that camera could store depends on the capacity of TF card. The larger capacity, the more storage (TF card maxium capacity is 64G).
- Page 7 SWM290 User Manual V2.1 5.4 SET password You can also set a password for your camera. Without password you can't watch the video which can protect your privacy. 2)Click the 1)Click the camera image area 3)Click the ”Setting Password” 4)Enter your new password, then click ”CHANGE PASSWORD”...
- Page 8 SWM290 User Manual V2.1 5.5 Change the camera name and flip the image If you find the image is opposite after installation. You can adjust it in your APP. 2)Click the 1)Click the camera image area 3)Click ”Common Setting” 4)Here you can change the name...
-
Page 9: Factory Default Settings
SWM290 User Manual V2.1 5.6 Restore factory default settings, delete and share Reset can initialize the camera, and delete some information like password. Delete camera can delete the camera in the APP. Share camera: Others need to scan the QR code or enter serial number and after that they can watch the camera image. - Page 10 SWM290 User Manual V2.1 6 Status instruction • Standby mode: the red led on • AP mode: the green led on and then flashes slowly • Waiting for connection: the red led flashes quickly (about flash 5 every second) • Success in connection the Wi-Fi: the green led flashes slowly (about flash 1 every second) or the red led on •...
- Page 11 SWM290 User Manual V2.1 Statement The information in the User's Manual is absolutely correct at the time of publication, however we are not responsible for the application of this document. The application mentioned in this document is for illustration purposes only. We do not guarantee or represent that these applications without further modifications are appropriate and that we also have the right to modify the product without any notice.