Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Autorotor T Series
- Page 1 ROTARY INDEX TABLES T SERIES TRANSLATION OF MANUAL FOR USE AND WARNINGS 04/2013...
- Page 2 La Spezia, Savona. SIN.TEC. DI P RMANNO ANTON Via O. Galante, 79/2 - 35129 Padova Triveneto Tel. 049 775 147 - Fax 049 780 62 69 e-mail: info@sinergietecniche.it http://www.sinergietecniche.it Rotary Index Tables T Series – Translation of manual for use and warnings...
- Page 3 SE AND ARNINGS The purchase concerning this document is subject to the General Sales Conditions of Sales available in our website http://www.autorotorgroup.com PRODUCT NAME SERIAL N° CALIBRATION Rotary Index Tables T Series – Translation of manual for use and warnings...
-
Page 4: Table Of Contents
ECHNICAL DATA SHEETS 16.1. Anomalies when operating, non routine maintenance and repairing 16.2. Table T95 16.3. Table T105 ECLARATION OF INCORPORATION FOR PARTLY COMPLETED MACHINERY II 1.B) NNEX Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 5: Machine Description
A dynamic shock during the deceleration phase hints at a load exceeding the one expected when designing. The customer must carefully plan the overall safety conditions of the machine designed to frame the rotary index table Autorotor and must take into account the specific features of the indexer itself. -
Page 6: Features Of The Tooling Plate To Be Connected To The Indexer
2.3.3. Emergency stop Although you mustn’t stop the intermittent units during the transfer time, the Autorotor table is mechanically designed as to allow the emergency stop at any moment of the cycle. Furthemore an electric braking system in countercurrent - within the current values set in the table depicting the features of the electric system of the motor - can be added to the built-in brake motor braking. -
Page 7: Torque Limiter Settings
Gauge the sliding torque (picture no. 5) by means of a “tool shaft“ (helping shaft) and a dynamometric wrench (picture no. 12). Tighten the adjusting ring till you get the needed setting value (picture no. 6). Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 8: Rossi
If the torque limiter doesn’t work properly, please get in touch with Autorotor after sale service to ascertain whether the technical data of the actual application are the same as the ones given to Autorotor to size the table and, as a consequence, if the type and/or quantity of springs is to be changed. - Page 9 This normally indicates a change of loading conditions than the design conditions. It is appropriate in this case to recheck the size of the unit (contact Autorotor). The steps below can be performed without removing the coupling from the gearbox (without checking with a torque wrench), evaluate how the joint application and loading far enough to determine a movement without shock and vibration upon arrival at the station.
- Page 10 RV / RIV Ring’s molle turns RV / RIV 1003 1050 1100 Ring’s molle RV / RIV turns 1065 1151 1238 1330 1400 ABLE TORQUE LIMITER ADJUSTING FOR OSSI Rotary Index Tables T Series – Translation of manual for use and warnings...
-
Page 11: Emergency Stop Time Calculation
(pict. 2, pict. 14, and table 3) in accordance with what stated by UNI ISO 3266 regulation. pict. 14 Lifting up through lifting eyebolts Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 12: Assembly And Installation
The torque limiter is to be set at a torque value no more than 15% higher than the normally used torque. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 13: Backlash On Transmission
11 N OISE PRODUCED BY THE TABLE The weighed steady sound pressure level of the rotary index table is less than 70 db (a). Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 14: Reference Regulation Framework
9 12 10 12 14 16 9 10 12 14 15 16 18 10 11 12 13 14 15 16 table 4: number of cam followers (S) depending on the stations number (standard configurations). Rotary Index Tables T Series – Translation of manual for use and warnings... - Page 15 GR SLL table 5: lubrification N.B.: for tables that relate to food or pharmaceutical applications in the field (if known) is used lubricant Q8 ROSSINI EP 00 Rotary Index Tables T Series – Translation of manual for use and warnings...
-
Page 16: Anomalies When Operating, Non Routine Maintenance And Repairing
♦ Stop at a ♦ a cam m)replace pins and cam followers as described in station during follower’s pin is the a.m. point. normal broken operation Rotary Index Tables T Series – Translation of manual for use and warnings... - Page 17 2: the cam followers are determined by the table serial number, that must be made known to Autorotor in order to allow the required spare parts to be sent immediately. Before replacing pins and cam followers you must check the holes, where the pins are forced.
-
Page 18: Table T10
BEARING 61804 200514 23 WASHER SPC 102959 SCREW TCEI M04x010 5931 SCREW TCEI M04x020 5931 8.8 200723 24 200241 For S value see table 4 – page 14 Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 19: Table T15
200015 23 A SCREW TCEI M06x016 5931 8.8 SHAFT 211202 COVER 206426 24 BEARING 16009 200156 25 KEYWAY 08x07x030 208563 For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 20: Table T25
200112 V3 SCREW TCEI M06x010 5931 SCREW TCEI M6x25 UNI5931 200016 27 201631 PIN CIL 06x030-A 8735 201526 For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 21: Table T35
SCREW TCEI M06x020 5931 8.8 WASHER SPC 102957 V3 SCREW TCEI M08x016 5931 SCREW TCEI M06x016 5931 8.8 200015 26 200835 For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 22: Anomalies When Operating, Non Routine Maintenance And Repairing
♦ ♦ Stop at a a cam follower’s p) replace pins and cam followers as described in the a.m. station during pin is broken point. normal operation Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 23: Table T55
200579 23 R WASHER SPC 102963 SCREW TCEI M08x016 5931 SCREW TCEI M6x25 UNI5931 200016 24 V3 200835 For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 24: Table T65
200420 208938 12 C1 BEARING 30310 200572 CAM FOLLOWER 200435 TCDF 58651 212823 WASHER 200436 PIPE OIL PLUG For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 25: Anomalies When Operating, Non Routine Maintenance And Repairing
♦ Stop at a ♦ a cam o) replace pins and cam followers as described in the station during follower’s pin a.m. point. normal is broken operation Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 26: Table T75
26 V2 SCREW TCEI M05x016 5931 8.8 200586 KEYWAY_ 4 18x11x120 208621 27 PF FRONT PLATE 215514 THREADED LOCKING RING 200429 M60x2 For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 27: Technical Data Sheets T95 E T105
♦ ♦ Stop at a station a cam follower’s q) replace pins and cam followers as described in the a.m. during normal pin is broken point. operation Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 28: Table T95
SEAL ANGST+PFISTER OR4425 200573 FLANGE UP T 95 STD 200762 SEAL ANGST+PFISTER A709010 200574 SEAL ANGST+PFISTER OR3850 200569 For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 29: Table T105
SEAL ANGST+PFISTER AS9012012 201937 27 INGRASSATORE M10x1 7663 A 201941 SEAL ANGST+PFISTER OR4550 201939 28 C3 BEARING 215461 For S value see table 4 – page 14. Rotary Index Tables T Series – Translation of manual for use and warnings... -
Page 30: Declaration Of Incorporation For Partly Completed Machinery
The person authorized to provide the relevant technical documentation, established in the Community is Mr. Ferdinando Bertolotti, Via dell' Industria 4, 26010 Vaiano Cremasco (CR). Vaiano Cremasco, 01/01/2010 General manager F. Bertolotti. Rotary Index Tables T Series – Translation of manual for use and warnings... - Page 31 Madison Heights MI 48071 Indiana Holland Ph. +31 516 521589 - Fax +31 516 515637 Ph. +1/248-307-0650 - Fax +1/248-307- Michigan info@everts.nl 0701 Ohio http://www.everts.nl sales@easomeng.com www.easomeng.com Rotary Index Tables T Series – Translation of manual for use and warnings...
- Page 32 AUTOROTOR srl – Via dell’industria, 4 – 26010 Vaiano Cremasco (CR) ITALY – tel.: +39 0373 278505 – fax.: +39 0373 278065 Rotary Index Tables T Series – Translation of manual for use and warnings e-mail: autorotor@autorotorgroup.com - web: http://www.autorotorgroup.com...
Need help?
Do you have a question about the T Series and is the answer not in the manual?
Questions and answers